Sanyo PLC-XR201, PLC-XR251 L When PJ lamp replacement time is reached:, L When lamp corres. value reaches preselect use time:

28
Chapter 3 Basic Setting and O peration
L When PJ lamp replacement time is reached:
Replace it with a new lamp immediately and reset the lamp counter. If the projector is
used without resetting the lamp counter, the alert mail is sent to users in every power-
on of the projector. This alert mail will not be sent when unchecking the mail sending
condition "When PJ lamp replacement time is reached".
TITLE:Message from projector
ProjectorModel Name: model name
TCP/IP:192.168.1.201 Projector Name: Proj05
Itsends you following message.
*Theprojector lamp has reached replacement time.
LampON 2000 h
L When lamp corres. value reaches preselect use time:
TITLE:Message from projector
ProjectorModel Name: model name
TCP/IP:192.168.1.201 Projector Name: Proj05
Itsends you following message.
*Theaccumulated lamp use time has reached 2000 hours.