Sanyo PLC-XR201, PLC-XR251 owner manual About event treatment, Sound warning alarm, Send e-mail

Chapter 3 Basic Operation

About event treatment

If the PJ Network Manager receives an event, it executes following event treatment items which are selected in the system default setting.

P Sound warning alarm

PSend e-mail

PDisplay warning dialog

Sound warning alarm

If the PJ Network Manager receives an event, the computer beeps an alarm sound. The alarm sound is depending on your computer sound setting.

The alarm sound is not made when your computer does not provide any speaker or the sound vol- ume is muted.

Send e-mail

Following example message is sent to the e-mail address you set up as the destination mail address.

From: Test1<admin@abc.xxx.com> (management file name)

Date : 2004/10/29 21:30

To : user@abc.xxx.com

Subject : Alert message

----------------------------------------------------------

Alert has occurred

*Accrual date : 2004/10/29 21:13:42

*Target name : Proj_10

*IP address : 192.168.1.101

*Event : ALERT

*Type : ON

*Warning column : Power status

*Warning value : Power failure

For the further information of event, type, warning column and warning value, see the item "Viewing the event log" (p.23).

The setting of event treatment, refer to item "Setting up default setting" (p.17).

Notes on using Windows XP Service Pack 2 (SP2) / Windows Vista

Windows Firewall is turned on by default in Windows XP SP2 and Windows Vista. Due to this Windows Firewall, the send e-mail function is not available. When using this mail function, you need to cancel the block for PJ Network Manager application. For the further details of Windows Firewall, see Windows help on your computer.

26