Sanyo PLC-XR201 Name of the button on the tool bar, Icon display for the target, Condition

Chapter 3 Basic Operation

Name of the button on the tool bar

The following commands are assigned to the buttons on the tool bar.

New Save Target display Event log display

Open		Target monitoring	Alert display
		Start/Stop		Command history display
Button	Operation
New	Creates a new management file.
Open	Opens an existing management file.
Save	Saves the active management file.
Target monitoring	Starts or stops target monitoring.
Target display	Displays selected target information.
Alert display	Displays all of alert information on the status list.
Event log display	Displays all the event logs.
Command history display ..	Displays all of the command history.

To switch the tool bar display on or off, select "Tool bar" from "Display" menu.

Icon display for the target

Displays icon according to the target condition.

Icon		Condition
Flat display type	Projector type
		Normal
		Abnormal condition (One of the abnormalities, Alert, Trap or System
		error is happening on the target.)
		Connection error (Target has been disconnected from the network)
		Acquisition error (Target has been disconnected from the network, or
		does not provide SNMP function.)
		Unknown (Target monitoring is not operating)

10