Sanyo PLC-XR251, PLC-XR201 owner manual System, Available selection at the RGB input

Control

System

This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu but- ton according to the input signal. Select a system and then click Set button.

Available selection at the RGB input

Item	Description
XGA1	It automatically switches to the proper computer
	system of the input signal.
	* The computer system modes (VGA, SVGA, XGA.
	SXGA, UXGA, WXGA...) which meet the input sig-
	nal are listed.

Available selection at the Video/S-video/Scart input

Item	Description
AUTO	It automatically switches to the proper color sys-
	tem of the input signal.
	* The selectable color systems are PAL, SECAM,
	NTSC, NTSC4.43, PAL-M and PAL-N.
	* AUTO is fixed at the Scart input.

Available selection at the Component input

Item	Description
AUTO	It automatically switches to the proper scanning
	system of the input signal.
	* The selectable scanning systems are 480i, 575i,
	480p, 575p, 720p, 1035i and 1080i.

ENGLISH

If the mode (Mode1 to Mode5, ExMode6 to ExMode50) which is stored in the item "PC Adjustment" ( p.38) is available, they are also listed together with the above mode.

35