Sanyo PLC-XR251, PLC-XR201 owner manual Examples Type and contents of alert mail

E-mail setting

Examples: Type and contents of alert mail

When the projector has an abnormality, the following alert messages are sent to the regis- tered E-mail address according to your selected condition. Administrator or user can take an efficient action quickly by receiving this message. This is very useful to maintain and service the projector.

The following are examples of received messages.

L When internal PJ temperature is too high:

TITLE: Message from projector

Projector Model Name: model name

TCP/IP: 192.168.1.201 Projector Name: Proj05

It sends you following message.

*The Projector lamp is turned off, because internal projector temperature is too high. Wait for the completion of the cooling process and make sure the projector has been turned into Standby. Then turn the projector on again.

If the Indicator continues flashing, check the air filter for dust accumulation.

L When internal PJ power circuit is failed:

TITLE: Message from projector

Projector Model Name: model name

TCP/IP: 192.168.1.201 Projector Name: Proj05

It sends you following message.

*The Projector lamp is turned off, because Projector power circuit is failed.
Unplug the Projector from AC outlet and ask servicing to qualified service personnel.
MCI	3.3V	OK
MAIN	ALL	NG	Error information

 The projector lamp was turned off, because the projector power circuit failed.
Unplug the AC power cord and plug it, and then turn on the projector once again to verify	ENGLISH
operation. If the problem still persists, unplug the AC power cord and ask servicing to a
qualified service personnel with the error information.

27