Sanyo PLC-XR201, PLC-XR251 PC adjustment

38
Chapter 4 Controlling the Projecto r
PC adjustment
Click PC Adj. on the main menu. This function is to adjust the signal from
the computer connected to the projector to obtain the proper picture
image on the screen.
Item Description
Currentmode...... Displays a current mode like VGA, SVGA, XGA. SXGA, UXGA, WXGA, etc. or Mode1 - Mode5
which are the customized mode created by using the "Mode Store" function described
below.
AutoPC adj..........Performs automatic adjustment.
Finesync. ..............Performs Fine Sync adjustment. (0 ~ 31)
Totaldots.............. Adjust the number of total dots in the horizontal period.
Clamp.........................Adjusts the phase of the clamp. (1 ~ 127)
Displayarea
Horizontal..........Adjusts the image area horizontally.
Vertical..............Adjusts the image area vertically.
Position
Horizontal.......Adjusts the horizontal position of the screen.
Vertical..............Adjusts the vertical position of the screen.
Reset.........................Resets the PC adjustments to the previous levels.
ModeStore.......... Stores the PC adjustment values. Select a mode no. [Mode1 - Mode5] from the pull-
down menu.
ModeFree............ Clear the PC adjustment values. Select a mode no. [Mode1 - Mode5] from the pull-
down menu.