Sanyo PLC-XR201, PLC-XR251 owner manual Stopping monitoring the target, Setting the target group

Chapter 3 Basic Operation

Stopping monitoring the target

To stop monitoring the target, click button again on the tool bar.

Displaying all the status information of the target

Select a target and click button on the tool bar. The following status window appears and displays all the available status information of the target.

 The target name and item which have an abnormality or connection error happen- ing are indicated with red.

 When PJ Network Manager cannot acquire the value of column information, "---" is displayed.

The above procedure can perform by selecting Target display from Display menu.

Setting the target group

The target group can be set up by the procedure below. When you set a command in the same group, you set it.

1 Select targets which you want to set from the status list. Select Group setting from Target menu, the dialog box will appear as the below figure.

2 Select a group, and then click OK button.

 "---" will not set the group.

The projectors setting different network passwords cannot be set to the same group. It is necessary for the projectors in the same group to set to the same password.

14