Sanyo PLC-XR251, PLC-XR201 owner manual Setting up the password of Telnet,  The initial setting is

Setting up the password of Telnet

Setting up the password of Telnet

The password of telnet can be set up by the procedure below. It is necessary to make a password, same as the network password.

1 Select a target which you want to set up the password of telnet from the status list. You can select multiple targets.

2 Select Telnet setting from Target menu, Telnet setting dialog box will appear as the below figure. Set a password and click OK button. When multiple targets are selected, all the selected targets are set as the same password.

 The initial setting is "0000".

Setting commands batch processing for multiple targets

The commands batch processing for multiple targets can be set up by the procedure below.

1 Select a target belonging to the batch processing group which you want to set, and select Commands batch processing from Target menu. Commands batch processing dialog box will appear as the below figure.

2 Select a command which you want to set, click Edit button. Parameter editing dia- log box will appear. Select a parameter, and then click OK button. The check box of Commands batch processing dialog box will be checked.

3 Click OK button. The commands are carried out to all the targets of the same group.

The commands also work for the target which is not set to a group.

PJ NETWORK MANAGER OWNER'S MANUAL

15