Sanyo PLC-XR251, PLC-XR201 owner manual Description of warning value

Description of Event, Type, Warning column, Warning value

Description of warning value

Warning Column

Warning Value

Description

	Un-connected	Projector has been disconnected from the network
		Projector has been connected to the network
Connect	Connected *
		PJ Network Manager could not acquire the MIB information
	Acquisition error
		from the equipment
	Power failure	Projector turned off due to the power failure of the projector
	TemperatureError	The projector turned off due to temperature error occurred
	Normal (AfterTempError)	Normal after temperature error occurred
Power status	RS232CFailure	The RS-232C communication error occurred
	Power management	The power management function turned projector lamp off
	LampFailure	The lamp failure occurred
	Normal(Standby) *	Projector turned into standby normally
	Normal(OnCoolingDown) *	On cooling down normally due to projector turned off
Input signal status	SignalsInterrupted	The signal was interrupted
	SignalsInputted *	The signal was inputted again
Inside Temperature status (A to		The projector turned off when the temperature was
C]	Abnormal
		abnormally high
External Temperature status
	ON *	When the lamp is on
Lamp status	Failure	When the lamp failed to ignite.
	Replace	It reached lamp replacing time.
Lamp time	(lamp time)	It reached user setting lamp replacing time
Filter time	(filter time)	It reached user setting filter time
(Auto play error)	Error	The error occurred during the auto image display

The warning value with "*" in the above table shows the event when the alert has cleared, alert type is "OFF".

The column order and width of the event log window are saved to the registry of the computer.

Up to 1000 of events can be stored. If it exceeds 1000 events, the oldest event is deleted and the latest event is added. The event log can be saved to the management file.

This Warning column is not available for some projector's model types.

PJ NETWORK MANAGER OWNER'S MANUAL

25