Sanyo PLC-XR201, PLC-XR251 owner manual How can I install several projectors?, Password/Login

Chapter 5 Appendix

QWe use the DHCP/BOOTP server to assign the IP address. Is it possible to use the projector in this network environment?

APossible. This projector supports the DHCP/BOOTP server. To use this projector in this network environment, set it up so that the DHCP/BOOTP server does not assign the IP address configured to this projector for another device on the network. Please consult your network administrator ( pp.13, 24).

QHow can I install several projectors?

AInstall and configure network one by one to avoid the IP address collision each other. To configure the IP address please see item "Network configuration" ( pp.12-13, 24).

Password/Login

QWhat should I do when I forget the IP address of the projector?

AYou can check the IP address in the "Network information" menu.

QWhat should I do when I forget the password (Network PIN code)?

APlease set the new network PIN code in the "Network PIN code" menu.

QCan I register the setting page as a web browser "Favorites" or "Bookmarks"?

APlease add "Login" page to your "Favorites" or "Bookmarks". Do not add the speci- fied setting page because it will not be able to perform the password authentica- tion correctly.

54