REMOTE OPERATION
You can operate the TAD from almost any
TOLL-SAVER
If the ring select switch is set to TS (toll- saver), the
USING REMOTE
COMMANDS
Follow these steps to operate the TAD from a remote location.
1.Dial your phone number.
Note: Even if the TAD is not set to answer calls, it will answer after about 9 rings.
2.When the TAD answers, enter your remote operation security code. The TAD beeps once to confirm that you entered the correct code.
Note: If you do not enter each digit of the security code within 8 sec- onds of the last, the TAD hangs up.
3.Enter the remote command (see “Remote Command List” on Page 18).
4.When you finish, hang up. The TAD resets to answer calls.
17