Samsung dcs application manual Trunk Numbering, PRI Mode

Page 2

4.Connect the RJ45 socket to the NT1 as per the latest version of the ACA (AUSTEL) standard TS009 or the Customer’s Premises Cabling Manual. The ACA state that the TX and RX pairs must be run in separate cable sheaths and recommend that each cable is screened.) The operation of the PRI card is independent of polarity of the TX and RX pairs as PRI operates in Point to point mode only. The connections should be made as shown below -

Description

RJ45 Socket

NT1

TX Pair

4 and 5

NT1 Equipment In

RX Pair

1 and 2

NT1 Equipment Out

6.The Telstra NTI has a row of status LEDs. If the DCS is connected correctly only the Power LED will be on. If any alarm LEDs are on , check the wiring to the DCS

7.Termination resistors are fitted to the PRI card. DO NOT fit extra termination resistors.

8.Power on the system and do a ‘System Reset’ or, for a new DCS installation, do a ‘Clear Memory’ using MMC811.

9.If the PRI card is being added to an existing DCS installation, use MMC724 to allocate line numbers to the PRI card.

10.Configure the PRI mode for Normal/DID as required using MMC 420 (see below).

11.Configure the PRI DLSEND and DLRECV options using MMC420 (see below).

12.Do a “Card Restart” on the PRI card using MMC418. (The DID/Normal programming will not take effect until the card is reset).

Trunk Numbering

The DCS assigns a line number to each B channel of each ISDN line in the system ie. Thirty (30) numbers per PRI card. After doing a ‘Clear Memory’ with MMC811, the DCS will assign numbers to the PRI card in the 700 number range, the same as with analogue trunks. For example, on a DCS with a TRK-A card in slot 1 and a PRI card in slot 2, the PRI card is assigned line numbers 703 to 732. If a ‘Clear Memory’ is not done after installing the PRI card, the line numbers for the PRI card will have to be assigned using MMC724. The ISDN lines can be assigned to line keys using MMC 722, the same as with analogue lines. From a system users point of view, the ISDN lines appear to operate like a normal PSTN line.

PRI Mode

The PRI card can be configured for two different modes using MMC 420 -

Normal

DDI (indial)

Primary Rate ISDN is only offered in a Point to Point mode. Ie. The DCS is the only device connected to the PRA.

Samsung DCS Application Note No 14 - Issue 01

For Further Information Call LSP Communications

Image 2
Contents Introduction DCS PRI Isdn FeaturesInstalling the PRI Card PRI Mode Trunk NumberingOther MMC420 Options Indial, MMC714 & did Number & Name Translation Table Bypass Operation DDI ExamplesDisplay Keysets Programming Incoming ClipOutgoing CLI Data Answering Incoming Calls Making Outgoing CallsPage Trouble Shooting Tips

dcs application specifications

Samsung DCS (Digital Command System) is an advanced communication and management application designed to enhance operational efficiency in various industry sectors. This innovative platform combines cutting-edge technologies with user-friendly features to streamline communication processes and project management.

One of the primary features of the Samsung DCS application is its robust communication capabilities. The platform supports seamless communication through multiple channels, including voice, video, and messaging. This diverse functionality allows teams to collaborate effectively, regardless of their geographical locations. With integrated VoIP technology, users can make high-quality voice calls, ensuring clarity and reliability during conversations.

Another notable aspect of the Samsung DCS application is its real-time data analytics. Organizations can monitor project progress and team performance through an intuitive dashboard that presents essential metrics and KPIs at a glance. This feature empowers managers to make informed decisions, optimizing resource allocation and enhancing productivity.

The application also boasts advanced security protocols, prioritizing user data protection at all times. Utilizing end-to-end encryption and secure access controls, Samsung DCS ensures that sensitive information remains confidential and protected from unauthorized access. Organizations can confidently adopt the application, knowing that their communication and project data are secure.

To ensure compatibility, Samsung DCS is designed to integrate seamlessly with existing enterprise systems and applications. This interoperability allows organizations to build on their current technology investments while leveraging the enhanced features of the DCS application. Furthermore, the platform is cloud-based, facilitating easy access from any device with internet connectivity. This flexibility promotes a remote working culture, allowing teams to stay connected and productive, regardless of their location.

User experience is a core focus of the Samsung DCS application. Its intuitive interface simplifies navigation, making it easy for users to adopt and utilize the platform effectively. Customizable settings enable organizations to tailor the application to meet specific needs, enhancing user satisfaction and engagement.

In summary, Samsung DCS is a powerful application that combines advanced communication features, real-time analytics, robust security, seamless integration, and a user-friendly interface. As organizations increasingly seek digital solutions to enhance collaboration and efficiency, Samsung DCS stands out as a premier choice for fostering effective communication and project management in today’s fast-paced business environment.