Headset operation
Headset
You can use this telephone handsfree when you install any VTech 2.5 mm headset, purchased separately.
Plug the headset into the jack located on the left side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.
Operating range
T h i s c o r d l e s s t e l e p h o n e o p e r a t e s w i t h i n the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate only over a certain distance - which can vary with the locations of the base and handset, the weather, and the construction of your home or office.
If you receive a call while you are out of range, the handset might not ring or if it does ring, the call might not connect well when you press TALK. Move closer to the base, then press TALK to answer the call.
If you move out of range during a phone conversation, you might hear noise or interference. To improve reception, move closer to the base.
If you move out of range without pressing OFF, the phone will be left off the hook. To hang up properly, walk back
into range, periodically pressing OFF.
•To purchase a headset, visit us on the web at www. vtechphones.com or call VTech Customer Service at
9511. In Canada, contact VTech Telecommunications Canada Ltd. at www. vtechcanada.com or
Basic operation
www.vtechphones.com | 27 |