Additional Information
Troubleshooting
If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTech Communications at
Problem | Suggestion |
My phone doesn’t | • Make sure the power cord is plugged in. |
work at all. | • Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall |
| jack. |
| • Disconnect the AC adaptor for a few minutes, and then reconnect it. |
| • Charge the battery in the handset for at least 16 hours. For optimum daily performance, return |
| the handset to its base when not in use. |
| • Reset the base. Unplug the unit’s electrical power. Wait for 15 seconds then plug it back in. |
| Allow up to one minute for the handset and base to reset. |
| • You may need to purchase a new battery, please refer to the Batteries section of this user’s |
| manual. |
I cannot get a dial | • Try all the suggestions above. |
tone. | • Move the handset closer to the base. You might have moved out of range. |
| • Your line cord might be malfunctioning. Try installing a new line cord. |
| • If the previous suggestions don’t work, disconnect the base unit from the telephone jack and |
| connect a different phone. If there is no dial tone on that phone either, the problem is in your |
| wiring or local service. Contact your local telephone company. |
|
|
www.vtechphones.com | 29 |
Additional information