VTech CS6419-2 user manual Battery needs charging when

Page 41

Appendix

Battery

It takes up to 10 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation

Operating time

While in handset use (talking*)

Up to seven hours

 

 

While in speakerphone mode (talking*)

Up to four hours

While not in use (standby**)

Up to five days

*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.

The battery needs charging when:

•A new battery is installed in the handset.

•The handset beeps.

•A battery is properly installed and the screen is blank.

•LOW BATTERY or PLACE IN CHARGER shows on the handset screen.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

•Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1(800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.

•Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.

•Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

•Exercise care in handling batteries in order not to create a short circuit with conductive materials.

•Charge the batteries provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

•Observe proper polarity orientation between the battery and metallic contacts.

•To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

37

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Online user’s manual Congratulations Table of contents Index AppendixGetting started Parts checklistTelephone base and charger installation Charge light remains on when charging Battery installationBattery indicators Battery status Action Battery chargingLOW Battery ChargerTabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationUSE light Telephone base layoutFlash Handset layoutCharge light Dialing keys MENU/SELECTUsing the menu Telephone settingsRinger volume To enter the handset menuLCD language Ringer toneKey tone Clear voicemail indicatorsTo manually turn off these indicators Set date and time Home area code Dial modeTelephone operation Call waiting MuteTemporary ringer silencing Temporary tone dialingReview and dial a redial entry Redial listStore a number from the redial list to the directory Delete a redial entryTo access the call log while on a call To access the directory while on a callTo access the redial list while on a call Chain dialingFind handset Join a call in progressTo join a call To start the paging toneINT Other Handset is Calling when you have twoIntercom Answer an incoming call during an intercom call Call transfer using intercomFrom this intercom call, you have the following options About the directory DirectoryCreate a new directory entry Edit Number Alphabetical search Review the directoryDial a directory entry Edit a directory entryStore a speed dial entry Speed dialDelete a speed dial entry Dial a speed dial numberInformation about caller ID with call waiting Caller IDAbout caller ID Not Available AT this Time Call logReview and dial from the call log Missed call indicatorMemory match Save a call Iog entry to the directory View dialing optionsCall log display screen messages Delete from the call logTo delete one entry To delete all entriesHandset display screen messages AppendixTelephone number you have entered is already stored On when the handset speakerphone is in use Handset and telephone base indicatorsHandset lights Telephone base lightsBattery needs charging when BatteryTo register a handset Expand your telephone systemAdd and register a handset optional To deregister all handsets Replace a handsetMy telephone does not work at all TroubleshootingThere is no dial tone Cannot dial outCharge light is off LOW Battery shows on the handset screenTelephone does not ring when there is an incoming call My handset beeps and is not performing normally Registration Failed appears on the handset Hear other calls when using the telephoneHear noise on the cordless handset and the keys do not work Caller ID entries do not match the numbers I need to dial My caller ID features are not working properlyNEW Voicemail and show on the display and I don’t know why OUT of Range or no PWR AT Base shows in the handset screenCommon cure for electronic equipment Important safety instructions Pacemaker patients Precautions for users of implanted cardiac pacemakersOperating range Avoid rough treatment MaintenanceRbrc seal About cordless telephonesWhat does this limited warranty cover? Limited warrantyHow long is the limited warranty period? What is not covered by this limited warranty?Other limitations How do you get warranty service?FCC Part 68 and Acta FCC, Acta and IC regulationsFCC Part Industry Canada Technical specifications Index Index

CS6419, CS6419-2 specifications

The VTech CS6419-2 is a reliable cordless phone system that combines modern technology with user-friendly features, making it an excellent choice for both home and small office use. With its sleek design and advanced functionalities, the CS6419-2 stands out in the crowded telecommunications market.

One of the main features of the VTech CS6419-2 is its two-line system, which allows users to manage calls from two different phone lines seamlessly. This is particularly beneficial for users who want to keep personal and business calls separated, ensuring that they can efficiently handle various communications without the risk of missing important calls. The system's ability to handle multiple lines makes it an ideal solution for busy households and small professional environments.

The CS6419-2 comes equipped with a range of technologies designed to enhance call quality and user experience. Notably, it features DECT 6.0 technology, which provides a secure and interference-free connection. With this technology, users can enjoy crystal-clear sound quality and extended range, ensuring they can move freely around their home or office without losing connectivity.

In terms of usability, the phone boasts an easy-to-read backlit display, making it simple to navigate menus and view call information, even in low-light conditions. The CS6419-2 also includes an intuitive keypad, allowing users to dial easily and efficiently. With features like call waiting and caller ID, users can easily manage incoming calls with comprehensive insight into who is contacting them.

Another significant characteristic of the VTech CS6419-2 is its digital answering system, which allows users to record and store messages for later review. This feature ensures that even when users are unavailable, they can still keep track of important communications. The system can store up to 14 minutes of messages, which can be easily accessed and managed.

Furthermore, the VTech CS6419-2 includes a range of customizable settings, such as volume control and ringtones, accommodating a variety of user preferences. Its energy-efficient technology also means it consumes less power while offering excellent performance.

In conclusion, the VTech CS6419-2 is an advanced cordless phone system that effectively blends practical features with modern technology, making it an essential gadget for anyone looking to streamline their communication needs in a user-friendly manner. With its dual-line capabilities, DECT 6.0 technology, and digital answering system, the CS6419-2 is designed to meet the demands of today’s busy lifestyles.
Top Page Image Contents