VTech CS6419-2 user manual Replace a handset, To deregister all handsets

Page 43

Appendix

Replace a handset

If you want to replace a handset or reassign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset.

To make deregistration easier, read all of the instructions below before you begin.

To deregister all handsets:

1.Press and hold /FIND HANDSET on the telephone base for about 10 seconds until the IN USE light on the telephone base turns on and starts to flash.

2.Press and release /FIND HANDSET again. You must press

/FIND HANDSET while the IN USE light is still flashing. The IN USE light flashes for approximately five seconds. If the light stops flashing, start again at Step 1.

3.All handsets show 1.PRESS FIND HS ON BASE 4 SEC and 2.THEN PRESS

# ON HANDSET alternately when the deregistration process completes. The deregistration process takes about 10 seconds to complete.

If deregistration fails, you may need to reset the telephone and try again.

To reset:

1.Pick up the registered handset and then press /FLASH.

2.Press OFF/CANCEL and place the handset back in the telephone base.

-OR-

• Unplug the power from the telephone base, then plug it back in.

You cannot deregister handsets if any other system handset is in use.

39

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Online user’s manual Congratulations Table of contents Index AppendixGetting started Parts checklistTelephone base and charger installation Charge light remains on when charging Battery installationCharger Battery chargingBattery indicators Battery status Action LOW BatteryTabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationUSE light Telephone base layoutCharge light Handset layoutFlash Dialing keys MENU/SELECTTo enter the handset menu Telephone settingsUsing the menu Ringer volumeLCD language Ringer toneTo manually turn off these indicators Clear voicemail indicatorsKey tone Set date and time Home area code Dial modeTelephone operation Temporary tone dialing MuteCall waiting Temporary ringer silencingDelete a redial entry Redial listReview and dial a redial entry Store a number from the redial list to the directoryChain dialing To access the directory while on a callTo access the call log while on a call To access the redial list while on a callTo start the paging tone Join a call in progressFind handset To join a callIntercom Other Handset is Calling when you have twoINT Answer an incoming call during an intercom call Call transfer using intercomFrom this intercom call, you have the following options About the directory DirectoryCreate a new directory entry Edit Number Edit a directory entry Review the directoryAlphabetical search Dial a directory entryStore a speed dial entry Speed dialDelete a speed dial entry Dial a speed dial numberAbout caller ID Caller IDInformation about caller ID with call waiting Not Available AT this Time Call logMemory match Missed call indicatorReview and dial from the call log Save a call Iog entry to the directory View dialing optionsTo delete all entries Delete from the call logCall log display screen messages To delete one entryHandset display screen messages AppendixTelephone number you have entered is already stored Telephone base lights Handset and telephone base indicatorsOn when the handset speakerphone is in use Handset lightsBattery needs charging when BatteryAdd and register a handset optional Expand your telephone systemTo register a handset To deregister all handsets Replace a handsetCannot dial out TroubleshootingMy telephone does not work at all There is no dial toneTelephone does not ring when there is an incoming call LOW Battery shows on the handset screenCharge light is off My handset beeps and is not performing normally Hear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneRegistration Failed appears on the handset Caller ID entries do not match the numbers I need to dial My caller ID features are not working properlyNEW Voicemail and show on the display and I don’t know why OUT of Range or no PWR AT Base shows in the handset screenCommon cure for electronic equipment Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersPacemaker patients Avoid rough treatment MaintenanceRbrc seal About cordless telephonesWhat is not covered by this limited warranty? Limited warrantyWhat does this limited warranty cover? How long is the limited warranty period?Other limitations How do you get warranty service?FCC Part FCC, Acta and IC regulationsFCC Part 68 and Acta Industry Canada Technical specifications Index Index

CS6419, CS6419-2 specifications

The VTech CS6419-2 is a reliable cordless phone system that combines modern technology with user-friendly features, making it an excellent choice for both home and small office use. With its sleek design and advanced functionalities, the CS6419-2 stands out in the crowded telecommunications market.

One of the main features of the VTech CS6419-2 is its two-line system, which allows users to manage calls from two different phone lines seamlessly. This is particularly beneficial for users who want to keep personal and business calls separated, ensuring that they can efficiently handle various communications without the risk of missing important calls. The system's ability to handle multiple lines makes it an ideal solution for busy households and small professional environments.

The CS6419-2 comes equipped with a range of technologies designed to enhance call quality and user experience. Notably, it features DECT 6.0 technology, which provides a secure and interference-free connection. With this technology, users can enjoy crystal-clear sound quality and extended range, ensuring they can move freely around their home or office without losing connectivity.

In terms of usability, the phone boasts an easy-to-read backlit display, making it simple to navigate menus and view call information, even in low-light conditions. The CS6419-2 also includes an intuitive keypad, allowing users to dial easily and efficiently. With features like call waiting and caller ID, users can easily manage incoming calls with comprehensive insight into who is contacting them.

Another significant characteristic of the VTech CS6419-2 is its digital answering system, which allows users to record and store messages for later review. This feature ensures that even when users are unavailable, they can still keep track of important communications. The system can store up to 14 minutes of messages, which can be easily accessed and managed.

Furthermore, the VTech CS6419-2 includes a range of customizable settings, such as volume control and ringtones, accommodating a variety of user preferences. Its energy-efficient technology also means it consumes less power while offering excellent performance.

In conclusion, the VTech CS6419-2 is an advanced cordless phone system that effectively blends practical features with modern technology, making it an essential gadget for anyone looking to streamline their communication needs in a user-friendly manner. With its dual-line capabilities, DECT 6.0 technology, and digital answering system, the CS6419-2 is designed to meet the demands of today’s busy lifestyles.
Top Page Image Contents