Basic Operation
Handset Operation
Call Forward
• A Handset (HS1), on an external call can forward it to the other Handset (HS2), by pressing and holding the INT key. The display of HS1 will initially show:
• HS2 can press ON to answer the call.
NOTE: If HS2 does not respond in about 30 seconds, the external call will be returned to HS1 and the display will show:
If the returned call is not answered within 30 seconds, the external call will end automati- cally.
Call Transfer
•A Handset (HS1) on an external call can forward it to the other Handset (HS2) by pressing the INT key.
NOTE: The external call is put on hold automatically.
•HS2 will ring, showing an intercom call.
•HS2 can answer the intercom call by pressing ON.
•HS1 and HS2 can discuss the external call.
•Press OFF on HS1 to transfer the external call to the other Handset.
•HS2 is now on the external call. CALL TRANSFERRED will display on HS1 briefly.
NOTE: If there is no answer on HS2, then HS1 can be reconnected to the held call by pressing ON to reconnect to the external call.
Conference Call
It is possible to establish a conference be- tween two Handsets and the external line.
If a Handset already has a connection to the external line, and the other Handset goes
Base Operation
From the Base Unit, you can use the PAGE key to locate the Handsets.
•When the Handset is in idle, press PAGE. The Handsets will display:
•To end the page at the Base, press PAGE again.
•To Mute the page Tone at the Handset, press OFF.
14