VTech 5873, i5871 important safety instructions Hearing aid compatibility

Page 81

FCC, ACTA and IC regulations

5.Hearing aid compatibility

If this product is equipped with a corded or cordless handset, it is hearing aid compatible.

6.Programming/testing of emergency numbers

If this product has memory dialing locations, you may choose to store police, fire department and emergency medical service telephone numbers in these locations. If you do, please keep three things in mind:

a. We recommend that you also write the telephone number on the directory card, so that you can still dial the emergency number manually if the memory dialing feature doesn’t work. b. This feature is provided only as a convenience, and the manufacturer assumes no responsibility for customer reliance upon the memory feature.

c. Testing the emergency telephone numbers you have stored is not recommended. However, if you do make a call to an emergency number:

•You must remain on the line and briefly explain the reason for the call before hanging up.

•Programming/testing of emergency numbers should be performed during off-peak hours, such as in the early morning or late evening, when the emergency services tend to be less busy.

IC (Industry Canada)

This telephone is registered for use in Canada.

The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.

Notice:

This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.

Notice:

The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN assigned to each terminal equipment provides an indication of the maximum number of terminal allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.

Before installing this equipment, user should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of services in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equip- ment malfunctions, may give the telecommunications company cause to requires the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Caution:

Users should not attempt to make sue connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate.

Your Cordless Phone is designed to operate at the maximum power allowed by the FCC and IC. This means your handset and base unit can communicate only over a certain distance – which will depend on the location of the base unit and handset, weather, and the construction and layout of your home or office.

www.vtechphones.com

79

Appendix

 

 

 

 

Page 80 Page 82
Image 81
Page 80 Page 82
Contents Need HELP? Add new handsets to make your telephone more versatile see Table of contents Table of contents Parts checklist for InstallationBase unit Handsets Charger Charger adapter Belt clips Installation Base unit installation Install handset battery Belt clip Belt clip & headset optionalAbout caller ID information Dial modeIf you subscribe to DSL service Handset layout Telephone settingsBase unit layout Screensaver Handset screen imagesRinger melody Handset soundsRinger vibrate Play the message Handset messagesDelete all messages Options during playbackClock setting Handset settingsPress MENU/SEL to select Clock Setting Tone settingsPhone settings Set contrastEdit handset name Set dial mode Show handset nameLanguage Reset settings Reset settingsWeekday setting Base settingsRinger volume Ringer melodyKeypad tone Factory settings ContrastDial type Make, answer, and end calls with the handset Basic operationSpeakerphone on the handset Options while on callsHold MuteIntercom call Volume controlRinger silencing Call waitingFrom one handset to all handsets and base unit From the base unit to a specific handsetPress MENU/SEL and select Global Or /SPEAKERPHONEFrom one handset to a specific handset or base unit Or /SPEAKERPHONE Conference callFlash or From one handset to the base unit or to another handset Transfer an external callAnswer an incoming call during an intercom call From the base unit to the handsetAdvanced operation PhonebookStore an entry in the phonebook Characters by number of key presses Key Chart of charactersSearch the phonebook Customize entriesDial a phonebook entry Edit a phonebook entryDelete a phonebook entry Call log Dial a call log entry On the handset Review the call logAt the base unit Dial or /SPEAKERPHONE to dialDelete an entry Save an entry to the handset phonebookDial an entry from the redial list Redial listDelete a redial entry Save a redial entry to the phonebook on the handsetMessage capacity Answering system operationSetting answering system Activate the answering systemSet record options Set call screening Set number of ringsSet security code Set new message toneOutgoing greeting Record your greetingPlay your greeting Screen displays Restore Factory GREETING, are YOU Restore to factory greetingMessage playback New message indicationMessage playback on the base unit Recording and playing memos Record a memoMemo playback Remote access Commands in remote standby modeCommands during playback mode Special features Record a sound clip by using the audio patch cordRecordable ringer Record a sound clip by using the microphone Picture download One-time software installationGetting started Graphics tab functionsOpen a graphic file Picture downloadTo transfer images from the software to the handset Graphic editing Creating an empty phonebook Phonebook tab functionsEdit a phonebook Special features Exporting contacts to a comma separated text file Press the Delete Selected Contacts button Handset and base indicators Handset iconsHandset LEDs ANS. OFF Base iconsNew Message Speakerphone Charging Base LEDsRegistration of handsets Add additional handsetsDe-register a handset Replace a handsetDe-register all handsets Charge spare battery pack Power guard featureInstallation Batteries Important safety instructions Problem Suggestion TroubleshootingManual for further instruction Company Computers, kitchen appliances and other cordless telephones Service Troubleshooting Operating range MaintenanceAbout cordless telephones WarrantyFCC, Acta and IC regulations How do you get warranty service?FCC Part Hearing aid compatibility Technical specifications Index Index Index 91-000865-010-000 User’s Manual
Related manuals
Manual 1 pages 35.9 Kb

i5871, 5873 specifications

The VTech i5871 is a sophisticated cordless phone system designed to meet the needs of modern households and businesses. It combines advanced technology with user-friendly features to enhance communication and make phone management easier for users.

One of the standout features of the VTech i5871 is its DECT 6.0 technology, which ensures a secure, interference-free communication experience. This technology offers crystal-clear audio quality and allows for an extended range, enabling users to roam freely throughout their home or office without sacrificing call quality.

The i5871 also sports a stylish and modern design, making it an attractive addition to any decor. Its large, backlit display provides easy visibility, allowing users to read caller information and navigate menus effortlessly, even in low light conditions. Additionally, the phone includes a high-quality speakerphone feature that enables hands-free conversations, providing convenience during multitasking.

Another significant characteristic of the VTech i5871 is its ability to support a digital answering system. With a recording capacity of up to 14 minutes, users can capture messages when they are unavailable to take calls. The system provides features such as remote access to messages, ensuring that users can stay connected even when away from their phone.

The VTech i5871 also incorporates a Caller ID function, which allows users to see who is calling before answering the phone. This feature provides an added layer of convenience and can help in filtering unwanted calls. The device can store up to 50 caller ID entries, making it easy to manage contacts and return calls efficiently.

In terms of battery life, the VTech i5871 boasts a long-lasting rechargeable battery, with up to 10 hours of talk time and 5 days of standby time. This reduces the frequency of charging and ensures that users can rely on their phone for extended periods.

Another notable feature includes its multi-handset capability, allowing users to add up to five additional handsets to the base unit. This feature is particularly beneficial for larger homes or offices, providing flexibility and convenience throughout different areas.

Overall, the VTech i5871 is a versatile cordless phone that combines practicality, advanced features, and a modern design, making it an excellent choice for anyone looking to enhance their communication experience. Whether for personal use or in a professional setting, the i5871 stands out as a reliable and feature-rich solution.
Top Page Image Contents