ITAD OPERATION
4 rings The incoming call is answered after 4 rings.
6 rings The incoming call is answered after 6 rings.
TollSaver The incoming call is answered after 2 rings only if there are new messages/memos present. Otherwise, the ITAD will answer calls after 4 rings. Thus, if Toll Saver is active and your ITAD rings 3 times when you call, you can
TIME/SET KEY
SELECT KEY
MENU KEY
MAILBOX X (1,2&3 ) K
press “*, X(star X)” during OGM play- back. X being Mailbox 1, 2 or 3.
•After desired mailbox is selected, “Mailbox X, now recording” will be announced, and incoming message recording starts after a beep.
•If incoming message length is less than 2 seconds, message will not be recorded.
Listening to Messages / Memos
When new messages and/or new memos are in the ITAD, the display will flash the total number of new messages in all mailboxes.
1.Press MENU until you hear “Set number of rings.”
2.Press SELECT until you hear the desired ring number, “2”, “4”, “6”, or “Toll Saver” announced.
3.Press TIME/SET to confirm your choice. The selected setting is then announced.
Leaving a Message (Incoming Message)
The ITAD will answer a call (according to the current ring selection), play the OGM followed by a beep to signal the start of recording.
•Default mailbox is MAILBOX 1.
•To record the incoming message in a specific mailbox, the caller should
MAILBOX X (1,2&3 ) KE
SKIP/QUICK KEY
REPEAT/SLOW KEY
•Press the desired Mailbox key to hear messages.
•The system will announce “Mailbox X, you have X new message(s) and X old message(s)” in the presence of new message in corresponding
25