VTech DS6511 Battery charging, Tabletop to wall mount installation, Shows Put in charger

Page 3

Battery charging

Once you have installed the battery, the screen indicates the battery status (see the table below). For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 12 hours of continuous charging.

 

 

 

Battery indicators

Battery status

Action

 

The screen is blank, or

The battery has no charge

Charge without interruption

 

shows Put in charger and

or very little charge. The

(at least 30 minutes).

 

 

 

flashes.

handset cannot be used.

 

 

 

 

 

 

 

 

 

 

 

The screen shows

The battery has enough

Charge without interruption

 

Low battery and

charge to be used for a

(at least 30 minutes).

 

 

 

flashes.

short time.

 

 

 

 

 

 

 

 

The screen shows

The battery is charged.

To keep the battery

 

HANDSET X.

 

charged, place it in the

 

 

 

 

 

telephone base or

 

 

 

 

 

charger when not in use.

• If you place the handset in the telephone base or charger without plugging in the battery, the screen displays NO BATTERY.

Tabletop to wall mount installation

The telephone comes ready for tabletop use. Follow the steps below to mount your telephone on a wall.

. If you have already installed the telephone for tabletop use, unplug the telephone line cord from the telephone wall jack, and unplug the telephone base power adapter from the wall outlet. Remove the telephone line cord and the power adapter cord from the grooves.

2.Route the telephone line cord through the rectangular hole on the wall mount bracket and plug it into the telephone wall jack. Route the power cord out of the telephone base and plug it into an electrical outlet not controlled by a wall switch.

3.Position the lower portion grooves on the telephone base to the lower portion tabs (marked B) on the wall mount bracket. Make sure the upper portion grooves of the telephone base are above the upper portion tabs (marked A) on the wall mount bracket. Push the telephone base down until it clicks securely in place.

4.Align the holes on the bracket with the standard wall plate and slide the bracket down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with twist ties.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Register online to get an additional 3-month warranty Parts checklistIntroduction If you do not hear a dial tone Telephone base and charger installationBattery installation Charge light remains on when chargingShows Put in charger Battery chargingTabletop to wall mount installation Low batteryHandset overview Telephone base overviewUSE light Pair and connect your first Bluetooth cell phone BluetoothUsing the handset menu Telephone settingsTelephone operation Find handset Call waitingTemporary ringer silencing Temporary tone dialingDirectory Speed dialAnswer an incoming call during an intercom call Caller ID log Caller IDAdd and register a handset Replace a handsetTroubleshooting Rewiring of telephone line for cable/VoIP service usersImportant safety instructions Cannot dial outCommon cure for electronic equipment Operating range Precautions for users of implanted cardiac pacemakersECO mode MaintenanceLimited warranty FCC, Acta and IC regulationsFCC Part Technical specifications FCC Part 68 and ActaIndustry Canada

DS6511, DS6511-2, DS6511-3, DS6511-16, DS6511-4A specifications

The VTech DS6511 series of cordless phones has garnered attention for its blend of modern technology and user-friendly features. The models DS6511-16, DS6511-3, DS6511-4A, DS6511-2, and DS6511-15 are designed to meet diverse communication needs, catering to both home and office environments.

One of the standout features across the DS6511 series is the DECT 6.0 technology, which provides superior sound quality and extended range compared to older cordless phone technologies. This ensures clear conversations without interference, allowing users to stay connected without the hassle of background noise or static.

A key characteristic of the VTech DS6511 models is their digital answering system. This feature not only allows users to receive voicemail but also provides customization options such as the ability to record personalized greetings. With a large call log capacity, these phones can store up to 50 entries, making it easy to keep track of important contacts and missed calls.

The DS6511 series also boasts an easy-to-use interface, featuring a large backlit display that enhances visibility, particularly in low-light conditions. The illuminated keypad makes dialing effortless, while large buttons are designed to be comfortable for all users, including seniors who may have difficulty with smaller keys.

Power-saving technology is another highlight of the VTech DS6511 series. These phones are engineered to optimize energy consumption, leading to longer battery life without sacrificing performance. With a typical talk time of up to 10 hours and a standby time of around 5 days, users can rely on their phone to remain operational even during extended usage.

Moreover, answering calls is made simple by the call block feature, allowing users to easily block unwanted callers. This feature is particularly beneficial for combating telemarketing calls, providing users with a sense of control over their communication.

Most models in the DS6511 series also support intercom functionality, enabling communication between handsets without the need to reach for a phone. This feature is especially advantageous in larger homes or offices, facilitating seamless communication in a hassle-free manner.

Overall, the VTech DS6511 series exemplifies a commitment to quality and innovation, offering consumers reliable and feature-rich communication solutions that keep pace with modern needs. With its focus on clarity, usability, and sustainability, the DS6511 line remains a strong contender in the cordless phone market.
Top Page Image Contents