Call Log (Caller ID - Call Waiting)
• Press SEL. Use and to scroll through the call log entries. When the beginning or the end of the call log is reached, a double beep will sound.
NOTE: The NEW icon in the lower left corner indicates the call is not yet reviewed.
Storing a Caller ID
•Follow the steps in Reviewing Caller ID to scroll to the record to be stored.
•To view alternate dialing sequences, press the # key repeatedly. The screen will cycle through the various dialing options (1 + area code + number, area code + number, 1 + number, number only.) Press SEL to store the displayed number.
•You'll hear a confirmation beep and the screen will display:
NOTES:
•If the CID isn't able to detect a name, EDIT NAME will be prompted. If unable to detect the number, EDIT NUMBER will be prompted. You will then need to enter the name and/or the number.
•If both name and number are missing, for example as in a private listing, the request will be rejected with the message:
•If the number already exists in the phonebook, the entry will not be stored, and the screen will show:
•If the phonebook is full, the screen will show:
Dialing from Caller ID
•Follow the steps in Reviewing Caller ID to scroll to the entry to be dialed.
•To change how the number will be dialed, (1 + area code + number, area code + number, 1 + number, number only.) press # repeatedly. The screen will
cycle through the dialing options. Press /FLASH or SPEAKER to dial the number.
Basic Operation
17