VTech VT-2931 From the Base Unit, Redial/Pause, Answering Calls, Handset Volume

Page 13

BASIC OPERATIONS

From the Base Unit:

Press the desired LINE key and listen for dial tone. Dial the phone number. The correspond- ing LINE key on the Handset will blink. Press OFF to end your call.

REDIAL/PAUSE

From the Handset: Your VT 2931 Handset remembers the last 5 phone numbers you dialed. With the Handset off, press REDIAL/PAUSE. The Handset will display:

This is the last phone number dialed from the Handset. Press or to scroll through the previous numbers dialed. Once the desired number is displayed on the Handset, press the appropriate LINE key to dial.

From the Base Unit: Press REDIAL/PAUSE. The last number dialed from the Base Unit is displayed. Press the appropriate LINE key to dial.

ANSWERING CALLS

From the Handset:

1.Press the flashing LINE key. The LINE key will glow steadily and the Handset will display:

2.The Base Unit will display HANDSET IN USE, and the corresponding LlNE key will blink.

3.Press OFF to end your call.

From the Base:

1.Press the flashing LINE key. The LINE key will glow steadily and the Base Unit will display:

2.The corresponding LINE key on the Handset will blink while the Speakerphone is in use.

3.Press OFF to end your call.

HANDSET VOLUME

 

Adjust the Handset volume with the

and

keys, located on the side

VOLUME

of the Handset.

 

 

The Handset will display the relative volume level as you adjust it.

KEYS

BASE SPEAKERPHONE VOLUME

Adjust the Base Unit volume with the and keys, located to the right of the dialpad. The Base will display the relative volume level as you adjust it. The Speakerphone volume can only be adjusted while the Base Unit is IN USE (in Speakerphone or Intercom mode).

MUTE

1. When you press the MUTE key while using the base speakerphone, you can hear your party’s voice, but your party can’t hear you.

2.While the call is muted, the MUTE indicator will be lit.

3.To go back to the two-way conversation, press MUTE again.

BASIC OPERATIONS

13

Image 13
Contents Table of Contents Important Safety Instructions Important Safety Instructions Simon James Wild Parts Check ListAntenna Headset Jack Handset Unit Keys and FeaturesBase Unit Keys and Features Plug the AC Power Adapter into a Setting UP Your VTStarted Installation Spare Battery ChargerPosition the wall mount bracket on the base Wall MountingArea Code Programming Basic OperationsAlternate Method KEY Beeps Setting RingerMaking Calls Alternate MethodBase Speakerphone Volume Handset VolumeFrom the Base Unit REDIAL/PAUSEVoice Mail Indicator Call TimerSpeakerphone Tips HoldConference Calling Voice Mail TipsReviewing the Call LOG Caller IDErasing Calls To Store a Name and Number DirectorySpeed Dialing from Caller ID KEY CharactersMaking Directory Calls Storing a Caller ID Record in the DirectoryEditing a Directory Entry Erasing a Directory EntryProgramming Speed Dial Numbers Base Unit OperationStoring a Pause in a Dialing Sequence Speed DialingData Port Base DisplayOperation Headset OperationBelt Clip Additional Information MaintenanceYOU Hear Other Calls While Using Your Phone Handset does not Ring When YOU Receive a CallCase of Difficulty Phone Doesnt Work AT ALLCommon Cure for Electronic Equipment Warranty Statement Vtech Communications FCC and IC RegulationsFCC Part IC Industry Canada Rbrctm Seal Technical Specifications Issued Page Page Page Page Page