VTech VT-2931 important safety instructions Started

Page 8

STARTED

SETTING UP YOUR VT 2931

5. Set the TONE/PULSE switch, located on the antenna side of the Base Unit, to the desired dialing mode. In most areas, TONE

is the desired mode.

L1 RINGER LEVEL L2	DIAL MODE
OFF LOWHIGH OFF LLOW2	HIGH PULSE TONE

BASE RINGER TONE/PULSE SWITCH

SWITCHES

GETTING

TELEPHONE

WALL JACK

RJ-14

- +

DC IN 9V	L1/L1+L2				LINEL2
LINE 2	L1/L1+L2				DC

6.After charging the battery pack, connect the telephone line(s).

I.If you have 2 lines coming out of a single wall jack:

Connect a 4-wire (RJ-14) phone cord be- tween the wall jack and the phone jack la- beled L1 / L1+L2 .

RJ-14

TELEPHONE

WALL JACK

WALL

TELEPHONE

WALL JACK

RJ-11 RJ-11

- +

DC IN 9V	L1/L1+L2					LINEL2
LINE 2	L1/L1+L2						DC

If you are wall mounting your Base Unit, a short, 4-wire phone cord is provided for your convenience.

II. If you have 2 lines, each coming out of a separate wall jack:

Connect a phone cord from the wall jack you wish to designate as your LINE1, to the L1 / L1+L2 jack on the back of the phone; next, connect a phone cord from the remaining wall jack to the L2 jack on the phone.

NOTE: You can use your VT 2931 as a one- line phone, as well. For best results, raise the antenna on the Handset and Base Unit when using your telephone.

8

Image 8

Contents Table of Contents Important Safety Instructions Important Safety Instructions Parts Check List Simon James WildHandset Unit Keys and Features Antenna Headset JackBase Unit Keys and Features Setting UP Your VT Plug the AC Power Adapter into aStarted Spare Battery Charger InstallationWall Mounting Position the wall mount bracket on the baseAlternate Method Basic OperationsArea Code Programming Setting Ringer KEY BeepsMaking Calls Alternate MethodHandset Volume Base Speakerphone VolumeFrom the Base Unit REDIAL/PAUSECall Timer Voice Mail IndicatorSpeakerphone Tips HoldVoice Mail Tips Conference CallingErasing Calls Caller IDReviewing the Call LOG Directory To Store a Name and NumberSpeed Dialing from Caller ID KEY CharactersStoring a Caller ID Record in the Directory Making Directory CallsEditing a Directory Entry Erasing a Directory EntryBase Unit Operation Programming Speed Dial NumbersStoring a Pause in a Dialing Sequence Speed DialingBase Display Data PortBelt Clip Headset OperationOperation Maintenance Additional InformationHandset does not Ring When YOU Receive a Call YOU Hear Other Calls While Using Your PhoneCase of Difficulty Phone Doesnt Work AT ALLCommon Cure for Electronic Equipment Warranty Statement FCC Part FCC and IC RegulationsVtech Communications IC Industry Canada Rbrctm Seal Technical Specifications Issued Page Page Page Page Page