Quick Reference Guide Basic Operation | VTech VT 1922 instruction

QUICK REFERENCE GUIDE

BASIC OPERATION

MEMORY DIALING (SPEED DIALING):

			MEMORY DIALING
			PRESS PHONE
			PRESS
			YOU WILL SEE
			ENTER MEMORY
			LOCATION (01-20)
•	Press the		PHONE	key.
•	Press	MEM .

•To view the time and date of the

call press and hold the 7 key. The time and date will be shown along with the phone number. You will see something like:

As long as the key is held down.

•To view other calls, scroll backwards and forwards by using

the (*) and (#) keys.

•To view additional dlgits not shown on the display, press the (9) key

MAKING CALLS

You can make calls directly from the handset whether you are at the base or away from it.

NOTE: There are two different ways to dial a number:

1.Press the PHONE key and wait for dial tone. Then dial the number you want.

2.Enter the number onto the display first, then press the PHONE key. This will dial the number that is displayed on the LCD after 2 seconds. See "ADVANCED DIALING" on Page

FLASH

You can use your VTech VT 1922 cordless phone with services such as Call Waiting. Simply press the PHONE key to FLASH the line.

REDIAL

To REDIAL the last number you dialed, press the PHONE key, then press REDIAL . The phone will automatically dial the number. The number will be shown on the display.

CLEARING THE DISPLAY

The display can be cleared by pressing and holding the CLEAR/DEL key down until the display clears.

MUTE

• Press MUTE during conversation

• Enter the memory location of the	• To exit press	OFF .
phone number you wish to dial
(01...20). The number will be	USING REDIAL
displayed on the LCD and will be	• Press the PHONE key, then
dialed.	REDIAL to	automatically redial
	out the last number you dialed.

CID - CALLER ID
• To view information stored in CID						Or
memory,	press	CID	on	the
handset.				•	Press	REDIAL	so	that the
					number is shown on the			display
					and then press the		PHONE key.
				HOLD
	CID - CALLER ID			•	Press	HOLD to put a call on
	PRESS				hold.
	YOU WILL SEE			•	To return to the call, press HOLD
				•	To return to the call, press HOLD
					key again

•The display will show the most recent call received.

If you make a mistake when dialing, press OFF to hang up, then press the PHONE key to get the dial tone again.

DISCONNECTING

To end a call, either place the handset back in the base, or press OFF on the handset.

ANSWERING CALLS

When the Handset rings, press any key other than OFF, MUTE or the VOLUME keys to answer your call.

VOLUME CONTROLS

The volume controls for the handset are located on the side of the unit. Press the (up) or (down) keys to increase or decrease the volume. Holding either key down will continuously change the volume setting. The earpiece volume level indicator on the LCD will change accordingly. There are four volume levels.

to disable the handset micro-
phone.
• Press	MUTE again to return to
normal	operation.

RINGER MUTE

•Press MUTE during incoming ringing to disable the ringer for the duration of the call.

HOLD

•Press HOLD to place an active call on hold.

•The LCD will display CALL ON HOLD.

•Press HOLD again to return to the call.

PAGE/HANDSET LOCATOR

•To page from the Base Unit, press PAGE .

•The LCD will display BASE PAGING HANDSET.

•To cancel the page, either press PAGE again on the Base Unit, or press OFF on the Handset.