Getting Started
Registering your new handset
NOT REGISTERED
MENU
Press MENU to begin
1 > REGISTER
2DEREGISTER
OK
SEARCH BASE
HANDSET NAME
PAT_
OK
PAT
INTERCM MENU
After the batteries are fully charged, follow the pro- cedure below to register the handset to the base.
1Select MENU.
2Highlight “Register,” then select OK. The screen will display, "Search Base."
3Press and hold the LOCATE HANDSET button on the base for at least 30 seconds.
4The handset should beep to indicate the registra- tion has completed. You will be prompted to enter a name for the new handset (see your tele- phone User’s Manual for help in entering names). We strongly recommend that you give each handset a distinctive name, to simplify paging and intercom use.
5Select OK to save the new handset name. The name you enter will be displayed on screen when the handset is idle, and in intercom paging lists.
Using your new handset
PAT
INTERCM MENU
Your new expansion handset operates in the same way as the handset supplied with your USB 7200 tele- phone. For complete operating instructions, launch the Vtech USB 7200 Phone Suite application on your PC, then click the User Manual link on the right.
5