•If the phone will not be used for a long period of time, remove the battery to prevent possible leakage..
•If you have any trouble installing your phone, please refer to the troubleshooting section near the end of this manual..
•Use only the VTech battery and AC power adaptor supplied with this telephone..
•if you need to install your phone within the same room as other cordless phones or wireless products, you may need to select a different channel for your router and or change the channel on your phone’s handsets..
Installation
Low battery warning
A low battery warning idicates one of the following:
1.There is no battery in your handset.. The supplied battery must be installed in the handset..
2.The battery needs to be replaced, or
3.The battery is installed incorrectly..
When in low battery mode, the LOW BATTERY icon will be on and an alarm will sound until the handset is returned to the base unit for recharging.. When the phone is on, the words LOW BATTERY will replace the words PHONE ON.. When the battery has been charged, these features will return to normal..
Choose a location
For optimum performance of your cordless telephone system:
1.Choose a central location for your base unit..
2.Install your phone(s) as far away as possible from
any other cordless (wireless) device such as cordless telephones, 802..11 wireless router (for example, WiFi)..
3. Install your phone(s) as far away as possible from other electronic equipment such as microwave ovens, televisions, computers, etc..
4..Install your telephone equipment away from heat sources and direct sunlight..
5.Avoid excessive moisture, dust or extreme cold..
www.vtechphones.com