VTech GZ 2339 Getting Started, Check for Dial Tone, Removable Handset and Base Plates

Page 5

Setup

Check for Dial Tone

After the battery is charged, connect the modular telephone cord between a live phone jack and the jack located on the bottom of the base unit. Pick up the handset and press ON. You should hear a dial tone.

CAUTION: Use only the VTech power supply provided with your telephone.

IMPORTANT! FOR MAXIMUM PERFORMANCE OF

YOUR CORDLESS TELEPHONE SYSTEM:

1. Choose a central location for your base unit.

2. Install your base unit and extension handsets away from electronic equipment, such as personal computers, television sets and microwave ovens.

3. In locations where there are multiple cordless telephones, separate base unit as much as pos- sible.

4.Install your telephone equipment away from heat sources and sunlight.

5.Avoid excessive moisture, dust or extreme cold.

Removable Handset and Base Plates

Your gz 2334 comes with additional handset and base plates of various colors. You can interchange these plates to suit your mood or room decor.

Handset Plate

Carefully remove the handset face and/or
back plate by pressing the button on the top of
the handset, then pulling the plate off. Attach
the new face and/or back plate by snapping
the lower portion, then the upper portion into
position.
NOTE: Ensure the bottom portion of the hand-
set back cover is set into handset before
snapping upper portion of cover into place.	Remove	Re-attach

Base Plate

Carefully remove the base plate by pressing the button on the right side of the base unit, then pulling the plate off. Align the new base plate, making sure the antenna passes through the appropriate slot. Secure the plate by snapping it into position.

Remove

Re-attach

Getting Started

5

Image 5

Contents Important Safety Instructions Important Safety Instructions Parts Check List Before You BeginInstallation of Battery in Handset Getting Started SetupConnecting Power to Base Unit Charge the BatteryCheck for Dial Tone Getting StartedRemovable Handset and Base Plates Handset PlateCID Handset Features Basic OperationUSE/CHARGING Base Features Basic OperationTelephone Operation Basic Operation Set the Dial Mode Preset to ToneSet Handset Ringer Style Set Date and TimeSet Language Telephone OperationTemporary Tone Dialing Operating RangeScreen Displays When Store a Number/Name in Speed Dial Memory Speed DialEdit a Number/Name Stored in Speed Dial Memory Reassign Locations in Speed Dial Memory Delete a Number/Name Stored in Speed Dial MemoryDial a Speed Dial Number Store a Number/Name in the Directory Telephone DirectoryEdit a Number/Name Stored in the Directory Move a Number/Name to the Speed Dial Memory Delete a Number/Name Stored in the DirectoryDial a Number from the Directory Caller ID Operation Store a Call History Record in the Directory Other party is blocking name and/or numberRinger Options Belt Clip Basic Operation Headset OperationCase of Difficulty Handset does not ring when you receive a callAdditional Information Additional Information Phone doesnt work at allCommon cure for electronic equipment You hear other calls while using your phoneMaintenance What is not covered by this limited warranty? What does this limited warranty cover?How long is the limited warranty period? Other Limitations How do you get warranty service?FCC and Acta Information FCC PartConnection and use with the nationwide telephone network Product identifier and REN informationRepair instructions Rights of the telephone companyIC Industry Canada Programming/testing of emergency numbersHearing aid compatibility FCC, Acta and IC Regulations Additional Information Rbrcr SealBase 153mm x 127mm x 87mmSPECIFICATIONS are Typical Technical SpecificationsMember of the Vtech Group of Companies Table of Contents Need HELP?