VTech t2415 manual Store a Number/Name in Speed Dial

Speed Dial

You can store up to 9 telephone numbers with names (up to 15 characters and 24 digits in each location) you dial frequently into the Speed Dial memory locations you assign (1 through 9). You can also store telephone numbers with names alphabetically in the directory. See Telephone Directory (on page 13) for instructions.

NOTES:

•The entries you store in Speed Dial memory will be marked with 01 through 09 in the telephone directory.

•Press OFF at any time to exit memory dial mode.

Store a Number/Name in Speed Dial

1.Press PROG on the Handset.

2.Press or until the screen displays SPEED DIAL.

3.Press SEL. The screen displays ENTER 1-9.

NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds, and you cannot store a new number until you delete a record in speed dial memory or

telephone directory.

4.Press the key (1 through 9) for the memory location you wish to store this entry. The screen displays ENTER NAME.

NOTE: If the location is not empty, your new entry will be stored in place of the old and the first entry will be deleted. Take caution to not save over entries you do not wish to delete from speed dial memory.

5.Using the chart below, enter up to 15 characters for the name you’re storing with the number. Use to backspace and make corrections; use to advance and add a space.

	Presses
Dial Key	1 2 3 4 5 6

1:1

2:	A	B	C	2
3:	D	E	F
				3
4:	G	H	I	4
5:	J	K	L	5

6:M N O 6

7:	P	Q	R	S	7
8:	T	U	V	8
9:	W	X	Y	Z	9

0:0

*:	*
#:	&	’	,	-	.	#

Basic Operation

11