Installation
Table/Desk Installation
C o n n e c t t h e
P o w e r C o r d
Standard electrical outlet
Connect the
T e l e p h o n e
Line Cord
Modular telephone jack
4.Charge the Handset Battery
Place the Handset in its Base. Charge the battery at least for 12 hours before using your telephone for the first time.
5.Check for Dial Tone
After the battery is charged, pick up the Handset and press PHONE. You should hear a dial tone.
6.Set the Dial Mode
If you have touch tone service, the phone is ready to use as soon as the battery is charged. If you have pulse (rotary) service, you’ll need to change the dial mode.
•Make sure the Handset is off. Press PROG.
•Press 
or 
until the screen displays DIAL MODE: and the current selection.
•Press SEL. The current setting blinks.
•Press 
or 
to select TONE or PULSE.
•Press SEL or PROG to save the displayed mode.
7.Set Date and Time
If you subscribe to Caller ID service, the date and time will be set automatically with the first incoming call. If you do not have Caller ID service, you can set the date and time manually:
•Make sure the Handset is off. Press PROG.
•Press 
or 
until DATE/TIME is displayed. Press SEL.
•The month is flashing. Press 
or 
until the screen displays the correct month. Press SEL.
•The day is flashing. Press 
or 
until the screen displays the correct day. Press SEL.
•The hour is flashing. Press 
or 
until the screen displays the correct hour. Press SEL.
•The minute is flashing. Press 
or 
until the screen displays the correct minute. Press SEL.
•AM or PM is flashing. Press 
or 
to choose between AM or PM. Press SEL.
8.Set Language
•Press PROG.
•Press 
or 
until LANGUAGE is displayed.
•Press SEL. The current setting blinks. Press 
or 
to displays ENGLISH,
ESPANOL or FRENCH.
•Press SEL to select displayed language and exit.
Getting Started
5