VTech BS5822 user manual Batteries, Battery care and maintenance

Page 33

•If you repeatedly get a low battery

indicator, even after charging overnight, the battery should be replaced..

•To reduce the risk of fire or injury to

persons or damage to the telephone, charge the battery provided with this phone (or equivalent) in accordance with the instructions and limitations specified in this user’s manual (see page 5)..

32

Batteries

Battery care and maintenance

After your battery is fully charged, you can expect the following performance:

Operation

Operating time

While in use (talking)

up to 8 hours

 

 

While not in use (standby*)

up to 4 days

 

 

* Handset is off the base unit or charger but not in use..

•The battery needs charging when:

—A new battery is installed in the handset..

—The phone beeps twice every five seconds.

—The screen displays LOW BATTERY and the low battery icon..

•Place the handset in the base so the CHARGE light turns on.. The battery is typically fully charged in 16 hours..

•You can keep the battery fully charged by returning the handset to the base after each use..

Replacing the handset battery

1.Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward..

2.Lift out the old battery and disconnect..

3. Align the two holes in the new battery’s plug with the socket pins, and snap the plug into place.. Snap the battery in the compartment, as described in Installation, on page 4..

4. Replace the cover by sliding it up into place..

5.The new battery must be charged before using the phone.. Place the handset in the base and allow it to charge for at least 16 hours the first charge. The telephone might operate before that, but for best performance, let the battery charge fully..

Page 32 Page 34
Image 33
Page 32 Page 34
Contents User’s Manual Table of contents Additional information Before you begin Parts checklistInstallation Install handset batteryChoose a location Table/desk installation Check for dial tone Charge the handset batteryTo register your accessory handsets Wall mounting optional Install the base unit away from electronicIcon Description Handset and base indicatorsHandset layout Base unit layout Making calls Handset operationAnswering calls Flash functionMute Volume controlConference call Transferring callsIntercom call Find handset Call forwardHandset display screen messages Screen displays WhenHandset X is Calling Telephone settings Ringer volumeRing tone Key tone preset to on Store a new entry PhonebookReview/dial from the phonebook Delete a phonebook entry Edit a phonebook entryShared call log Caller IDAbout call history caller ID Review call historyDelete records from call history Store a call history record in the directory Dial a displayed numberAccess voicemail VoicemailClear voicemail Program the password Program the voicemail keyProgram the play key Reset all codes Program the skip keyProgram the erase key Change PPU key setting Custom pay-per-use PPU features PPU keys on handset Change auto call back numberChange repeat dialing number Change 3-way calling numberHeadset Headset operationBatteries Battery care and maintenanceProblem Suggestion TroubleshootingUnable to Call Near the microwave Troubleshooting Low area For this to take place Warranty MaintenanceImportant safety instructions FCC Part FCC, Acta and IC regulationsIndustry Canada Rbrc sealTechnical specifications Index Index 91-000XXX-010-000
Top Page Image Contents