Special Features
Special Features
Interference Eliminator Codes
Interference Eliminator Codes help minimize interference by providing a choice of code combinations. Your radio has 99 Interference Elimintor Codes. Codes
To set the code for a channel:
1.Press 
until the code starts to flash.
2.Press 
or 
to select the code.
3.Press 
to save the code setting.
You can set a different code for each channel using this procedure. An extended press of 
or 
allow you to scroll through the Interference Eliminator Codes rapidly so you can quickly reach the code you want.
Note: You must set the Interference Eliminator Code to 
on a radio that uses Interference Eliminator Codes to communicate with radios that do not have Interference Eliminator Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a continuous warning tone and stops transmitting if you press 
for 60 continuous seconds.
19