English
Powering On/Off (On-Off/End/Home Key)
To power On, press and hold 
. Your MTP850 Ex/MTP810 Ex
performs a
To power Off, press and hold 
. You will hear a beep and the Powering Off message is displayed.
Powering On (Emergency Button)
Press and hold the Emergency button to power On. The MTP850 Ex/MTP810 Ex will power On in Emergency Mode or in standard mode (as programmed).
Powering On with Transmit Inhibit (TXI) Active
Transmit Inhibit is a feature allowing you to switch off transmission before entering a
this feature, press |
|
|
|
MENU and select More...> Networks > TXI | |||
Mode > Activate. |
|
|
|
Pressing the Emergency button, even if Transmit Inhibit is activated, causes the MTP850 Ex/ MTP810 Ex to transmit immediately. The MTP850 Ex/MTP810 Ex must NOT be within the RF sensi- tive area when entering Emergency Mode.
The TXI Mode remains active at power On. You will be asked whether to leave the TXI Mode On or not.
Ensure you have left the RF sensitive area before deactivating Transmit Inhibit.
Press the Yes soft key to deactivate the TXI Mode. If the MTP850 Ex/MTP810 Ex was previously used in Trunked Mode, it will register to the network. If the MTP850 Ex/MTP810 Ex was previously used in Direct Mode, it will remain in Direct Mode.
Press No in Trunked Mode and the MTP850 Ex/MTP810 Ex powers down; press No in Direct Mode and you remain in Direct Mode with TXI selected.
24