Motorola MTP810 EX, MTP850 EX Getting Started, Installing the Battery, Replacing the Battery

Page 22

English

Getting Started

Battery

Installing the Battery

1.Remove the battery from its protective clear plastic case.

2.Insert the battery top into the compartment as illustrated.

3.Carefully slide the battery until it clicks into place.

Replacing the Battery

To remove the battery:

1.Lift the latch on the bottom as per markings.

2.Pull the battery out.

3.Replace the battery.

Battery changing is NOT allowed in gas and dust environment.Battery replacing must occur ONLY in non-hazardous areas.

Charging the Battery

Motorola approved chargers provide optimum performance. Other chargers may not fully charge your Motorola Lithium-Ion battery or may reduce the life of the battery.

Battery charging must occur ONLY in non-haz- ardous areas. After charging, the radio must be left to rest for at least 3 minutes.

Image 22

Contents When printed by Motorola Page Contents Group Calls Emergency ModeSelecting TMO or DMO Operation Private, Phone, and Pabx CallsMessages Tips & Tricks Quick Reference GuideSafety and Disposal Information Copyright InformationControls and Indicators MTP850 Ex/MTP810 Ex OverviewNumber Description = High Tone = Low Tone Description Type Repeated Idle Audio Signal TonesCall Description Type Repeated Incoming CallsBattery/General Soft Keys Key, Knob, and Button OverviewOn-Off/End/Home Key Menu KeyFunction Keys Emergency ButtonSpeaker Control Key To Return to the Previous Level LED Status IndicatorTo Enter the Menu Items To Exit the Menu ItemsList of Menu Items DMO SCKList of Menu Items Cont’d Scanning Display Status IconsGeneral Icons All Tones Off Battery StrengthStatus Icon Description Speaker Off Low AudioMenu Icons Inbox IconsContact Icons Replacing the Battery BatteryInstalling the Battery Charging the BatteryAdditional Battery Warnings/Cautions Battery Maintenance Looking After the BatteryAttaching the Antenna Battery Capacity InformationBattery Capacity Information DescriptionPowering On with Transmit Inhibit TXI Active Powering On/Off On-Off/End/Home KeyPowering On Emergency Button To power On, press and hold . Your MTP850 Ex/MTP810 ExLooking After Your MTP850 Ex/MTP810 Ex Locking/Unlocking the KeypadTo unlock Entering TMO or DMO Press Select More... Networks Direct Mode ifSelecting TMO or DMO Operation MTP850 Ex/MTP810 Ex is in DMOMy Groups Folder Using the Rotary KnobGroup Calls Selecting a GroupSelecting a Folder TMO Group CallsReceiving a TMO Broadcast Call DMO Group CallsReceiving a TMO Group Call Making a DMO Group CallReceiving a DMO Group Call To exit DMO, press Optns and select Trunked ModeExiting DMO Private Call How to DialPrivate, Phone, and Pabx Calls Dialing via the Contact ListReceiving a Private Call Phone and Pabx CallsMaking a Phone or Pabx Call Entering or Exiting Emergency Mode Emergency ModeSending an Emergency Alarm Hot Microphone Feature Making an Emergency Group CallSending a User-defined Message MessagesSending a Status Message Sending a Predefined MessageHandling Unread New Messages Tips & Tricks Modeless OperationEnglish Feature, press Select Man Down Off English Turning MTP850 Ex/MTP810 Ex On/Off Using MTP850 Ex/MTP810 Ex Menu SystemSelecting Trunked/Direct Mode Operation Making a TMO Group CallAnswering Call Making DMO Half-duplex Private CallMaking Full-duplex Private Call/ Phone/PABX Call Sending Status Message