Grandstream Networks BT200 Key Button Definitions, Up ↑, Down ↓, Menu, Called, Callers, Hold

TABLE 5: KEYPAD BUTTON DEFINITIONS

Key Button	Key Button Definitions
UP ↑	Use button to select next “Menu Item” when phone is in keypad configuration mode; Or
	increase handset/speakerphone volume when phone is ACTIVE; Or increase ring volume
	when phone is in IDLE mode
DOWN ↓	Use button to select previous “Menu Item” when phone is in keypad configure mode; Or
	decrease handset/speakerphone volume when phone is ACTIVE; Or decrease ring volume
	when is in IDLE mode
MENU	Enter keypad MENU mode when phone is in IDLE mode.
	It is also the ENTER key once entering MENU
CALLED	After off hook, press to display the dialed numbers. When number displayed, press the
	SEND key can make call using that displayed number
CALLERS	After off hook, press to display the incoming Caller IDs. When number displayed, press the
	SEND key can make call using that displayed number
MSG	Enter to retrieve (video) voice mails or other messages
HOLD	Place ACTIVE call on hold
TRNF	TRANSFER key: Transfer an ACTIVE call to another number
CONF	Press CONF button to connect Calling/Called party into conference
FLASH	Flash to switch between two lines
SPEAKER	Enable/Disable hands-free speaker mode
SEND	Press SEND to dial a new number or redial last number dialed. Press send button to send
	a call immediately before “no key entry timeout” value expires
MUTE/DEL	Mute an active call; or Delete a key entry
	Also used to ‘REJECT’ incoming call.
0 - 9, *, #	Standard phone keypad; press # key to send call; * key for special needs

Grandstream Networks, Inc.	BT200 User Manual	Page 11 of 37
	Firmware 1.1.1.14	Last Updated: 12/2006