Grandstream Networks BT200 End User Password IP Address Time Zone Daylight Savings Time, Examples

Page 20
End User

TABLE 8: KEYPAD BUTTON DEFINITIONS

End User

Password

IP Address

Time Zone

Daylight Savings Time

This contains the password to access the Web Configuration Menu. This field is case sensitive with a maximum length of 25 characters.

There are two modes under which the BT200 can operate:

1.DHCP Mode: all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The BT200 will acquire its IP address from the first DHCP server it discovers from the LAN it is connected.

To use the PPPoE feature the PPPoE account settings need to be set. The BT200 will attempt to establish a PPPoE session if any of the PPPoE fields is set.

2.STATIC IP Mode: the IP address, Subnet Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields will need to be configured. These fields are set to zero by default.

This parameter controls how the date/time is displayed according to the specified time zone.

This parameter controls whether the displayed time will be daylight savings time or not. If set to “Yes” and the Optional Rule is empty, then the displayed time will be 1 hour ahead of normal time. The “Automatic Daylight Saving Time Rule” shall have the following syntax: start-time;end-time;saving

Both start-time and end-time have the same syntax: month,day,weekday,hour,minute

month: 1,2,3,..,12 (for Jan, Feb, .., Dec)

day: [+-]1,2,3,..,31

weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0 which means the daylight saving rule is not based on week days but based on the day of the month. hour: hour (0-23), minute: minute (0-59)

If “weekday” is 0, it means the date to start or end daylight saving is at exactly the given date. In that case, the “day” value must not be negative. If “weekday” is not zero and “day” is positive, then the daylight saving starts on the first “day”th iteration of the weekday (1st Sunday, 3rd Tuesday etc). If “weekday” us not zero and “day” is negative, then the daylight saving starts on the last “day”th iteration of the weekday (last Sunday, 3rd last Tuesday etc). The saving is in the unit of minutes. The saving time may also be preceded by a negative (-) sign if subtraction is desired instead of addition. The default value for “Automatic Daylight Saving Time Rule” shall be set to

“04,01,7,02,00;10,-1,7,02,00;60” which is the rule for US.

Examples

US/Canada where daylight saving time is applicable: 04,01,7,02,00;10,-1,7,02,00;60

This means the daylight saving time starts from the first Sunday of April at 2AM and ends the last Sunday of October at 2AM. The saving is 60 minutes (1hour).

Grandstream Networks, Inc.

BT200 User Manual

Page 20 of 37

 

Firmware 1.1.1.14

Last Updated: 12/2006

Page 19 Page 21
Image 20
Page 19 Page 21
Contents BT200 User Manual Grandstream Networks, IncBT-Series BT200 Dual Ethernet Port SIP Phone Firmware VersionTABLE OF CONTENTS BT200 USER MANUALAccess the Web Configuration Menu Placing a Quick IP CallGUI INTERFACES TABLE OF FIGURESTABLE OF TABLES WELCOME SAFETY COMPLIANCESWARRANTY CONNECT YOUR PHONE CONNECTING YOUR PHONEEQUIPMENT PACKAGING CONNECT YOUR PHONE TO THE VOIP NETWORK PRODUCT OVERVIEW KEY FEATURESHARDWARE FEATURES Lines Protocol Support1 Display Feature Keys Ethernet Ports Device Management Audio Features Call Handling FeaturesNetwork and Provisioning Advanced Server Features Security TABLE 3 TECHNICAL SOFTWARE FEATURESUSING THE BT200 IP PHONE GETTING FAMILIAR WITH THE LCD / LEDAlarm Clock Icon IconGETTING FAMILIAR WITH KEYPAD Menu and Call Keys Advanced Feature Buttons Speaker, Send Mute/DelAM PM Real-time ClockKey Button Key Button DefinitionsUP ↑ DOWN ↓PLACING CALLS USING AN IP ADDRESS MAKING AND ANSWERING PHONE CALLSHANDSET, SPEAKERPHONE AND HEADSET MODE PLACING A TRADITIONAL PHONE CALLPlacing a Quick IP Call ANSWER AN INCOMING CALLCall Hold Call Waiting and Call FlashingBlind and Attended Call Transfer Expected outcomes3-way Conference Retrieving MessagesCALL FEATURES Call FeaturesDisable Call Waiting per Call Enable Call Waiting per CallCONFIGURATION GUIDE CONFIGURATION WITH KEYPADMenu Item Menu FunctionsCONFIGURATION WITH WEB BROWSER Access the Web Configuration MenuEND USER CONFIGURATION End User Password IP Address Time Zone Daylight Savings Time ExamplesWAN side HTTP access Reply to ICMP on WAN port Cloned WAN MAC Addr Date Display Format Display Account Name instead of Date Device ModeLAN Subnet Mask LAN DHCP Base IP DHCP IP Lease Time DMZ IP Port ForwardingADVANCED USER CONFIGURATION MAC AddressIP Address Product ModelAdmin Password Silence Suppression Voice Frames per TX Layer 3 QoS Layer 2 QoS No Key Entry Timeout Use # as Send Key Local RTP portFirmware Upgrade and provisioning Via TFTP Server Via HTTP Server Allow DHCP Option 66 to override server Automatic UpgradeAuthenticate Conf File Off-hook Auto Dial Use Random Port Keep-alive interval Use NAT IP STUN ServerAllow DHCP Option 42 to override NTP server Distinctive Ring Tone Disable Call WaitingDTMF Payload Type Syslog Server Syslog Level NTP server Lock keypad update Authenticate IDAuthenticate PasswordSIP Registration Unregister on Reboot Local SIP port SIP T1 Timeout SIP T2 Interval NAT TraversalEarly Dial Dial Plan Prefix Enable Call Features Disable Missed-Call Register ExpirationSession Expiration Min-SE Caller Request Timer Callee Request Timer Force Timer UAC Specify Refresher UAS Specify Refresher Force INVITEEnable 100rel Account Ring Tone Send Anonymous Auto Answer Allow Auto Answer by Call-Info Turn off speaker on remote disconnectSAVING THE CONFIGURATION CHANGES Special FeatureREBOOTING THE PHONE FROM REMOTE Check SIP User ID for Incoming Invite Preferred Vocoder SRTP ModeCONFIGURATION THROUGH CENTRAL PROVISIONING SERVER FIRMWARE UPGRADE UPGRADE THROUGH HTTPUPGRADE THROUGH TFTP Keypad Configuration Prompt MenuNOTE for TFTP/HTTP Firmware Upgrade No Local TFTP ServerRESTORE FACTORY DEFAULT SETTING Directions for RestorationGLOSSARY OF TERMS FXS is complimentary to FXS and the PSTN NAT Network Address Translation UDP User Datagram Protocol UDP is one of the core protocols of the Internet protocol suite. Using UDP, programs on networked computers can send short messages known as datagrams to one another. UDP does not provide the reliability and ordering guarantees that TCP does datagrams may arrive out of order or go missing without notice. However, as a result, UDP is faster and more efficient for many lightweight or time-sensitive purposes
Top Page Image Contents