VTech VT 2910C instruction manual Getting Started, Setting up your VTech VT 2910c, Preference

Page 20

GETTING STARTED

Setting up your VTech VT 2910c

1.Choose an area near an electrical outlet and telephone wall jack(s).

2.Plug the AC power adaptor into the electrical outlet and the DC connector to the back of the Base Unit.

TELEPHONE

WALL JACK

AC

OUTLET

CAUTION: Use only the AC adaptor shipped with your VT 2910c. This is a Class 2 AC adaptor, specifically designed for use with your telephone.

3.Set the TONE/PULSE switch, located on the underside of the Base Unit. Select the mode compatible with your local telephone service (for most areas, TONE is the preferred dialing mode).

4.Set the Base Unit RINGER switches to ON or OFF, depending on your

preference.

5.C H A R G E T H E H A N D S E T BATTERY PACK BEFORE USE. The battery pack should be charged for 16 hours before using your phone for the first time.

NOTE: Connect power to the Base Unit before placing the Handset into the cradle.

6.Connect the telephone line cords:

If you have 2 telephone lines installed on a single jack (type RJ- 14), use the 2-line cord provided. This is a 4 wire cord with a black tip at each end. Plug one end of this cord into the jack marked L1 or L1/L2, located on the back edge of the Base Unit. Plug the other end of this cord into your 2- line wall jack.

If you have 2 separate telephone line jacks (2 RJ-11 jacks), plug one telephone line cord into the jack marked L1 or L1/L2, and another cord into the jack marked L2. In this situation, it does not matter which line cord you choose for each line. Plug the other end of the 2 line cords into your separate wall jacks.

NOTE: For two line operation, you must have 2 telephone lines, each with their own unique phone number. If you have only one telephone line, your VT 2910c will still operate, but only as a single line phone.

7.CHECK FOR DIAL TONE. After the battery pack is charged, raise the Base Unit Antenna to an upright position. Then, pick up the Handset and press LINE 1 or LINE 2. The LCD should display HANDSET ON 1 (or 2), and you should hear a dial tone. If you do not hear a dial tone, there may be a problem with the telephone jack or the wiring. See IN CASE OF DIFFICULTY.

20

VT2910C EN MANU

20

12/16/99, 6:17 AM

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Introduction Special Features 900MHz Operation Fully Digital Link between HandsetParts Check List Belt ClipImportant Safety Instructions Operation If the product exhibits a distinct change in performanceRechargeable Battery Packs Spare Battery ChargerTo Charge The Battery Pack Charging the Handset batteriesReplacing The Handset Battery Pack Use only Vtech battery267-7377in Canada Wall Mounting Handset Features Line 1 KEY Line 2 KEYOFF KEY Tone KEYRedial KEY HOLD/PAUSE KEYCONFERENCE/CLEAR CONF/ Clear KEY INTERCOM/DELETE KEYVolume Control KEY Handset via Intercom key Handset has accessed LineExamples of the LCD Display 12/16/99, 617 AM Examples of the LCD Dicplay Base Unit Features Base Unit FeaturesBase LED Indicators Power LED Charge LEDSpare Charge LED Intercom LEDVolume UP & Down Keys TONE/PULSE SwitchConference Conf KEY Hold KEYSetting up your VTech VT 2910c Getting StartedPreference Connect the telephone line cordsBasic Operations Making CallsTo put a call on Hold from the Handset Press the HOLD/PAUSE key to place a call on HoldAnswering Calls from Handset Base Unit SpeakerphoneSwitching from Handset to Base or Base to Handset Switching from Handset to Base Unit SpeakerphoneSwitching from Speakerphone to Handset Call WaitingHandset Paging Base Unit Basic OperationBase Unit Paging Handset Programming the Ringer Advanced OperationsConference Calls Programming the Base Unit Ringer Memory DialingLocation RedialSpeed Dial Location Changing Stored NumbersTo delete all phone numbers stored in Memory Delete ALL? DEL to AllowCID-CALLER ID Characters, including spacesCall is displayed Examples of Caller ID DisplaysDialing from CID Memory Deleting CID Records Deleting a single CID recordDeleting Single Call Deleting ALL CID recordsCID-CALLER ID Maintenance Maintenance Taking Care of Your TelephoneHandset does not Ring When YOU Receive a Call Case of DifficultyPhone DOESN’T Work AT ALL No Dial ToneYOU Hear Other Calls While Using Your Phone Make sure the power cord is pluggedOne of the other phones Common Cure for Electronic EquipmentWarranty Statement What does OUR Warranty not COVER? FCC and IC Regulations United StatesVtech Communications Canada Vtech Electronics FCC PartFCC and IC Regulations IC Industry Canada This telephone is registered for use in CanadaSpecifications Table of Contents Advanced Operations Issue

VT 2910C specifications

The VTech VT 2910C is a versatile and innovative device designed to cater to the communication needs of modern users while ensuring reliability and enhanced functionality. Recognized for its user-friendly features, the VT 2910C stands out in the market, making it a popular choice amongst families and professionals alike.

One of the primary features of the VT 2910C is its advanced cordless technology. This device utilizes DECT 6.0 technology, which ensures a secure and interference-free connection. Users benefit from improved sound quality, extended range, and reduced power consumption, making conversations clearer and more reliable.

The phone is designed with a sleek, ergonomic structure that enhances usability. A large, backlit keypad and display make it easy to navigate through settings and contacts, even in low-light conditions. Furthermore, the VT 2910C includes a digital answering system that can store up to 14 minutes of messages, ensuring that users never miss important calls.

Another significant characteristic of the VT 2910C is its impressive multi-line capability. This feature allows users to manage multiple lines simultaneously, making it ideal for small businesses or home offices where efficiency is paramount. Additionally, the phone boasts a conference call feature, enabling users to connect with multiple parties effortlessly.

The device also supports caller ID functionality, displaying the name and number of incoming callers, which provides users with the option to screen their calls effectively. With memory storage for up to 50 contacts, the VT 2910C facilitates quick access to important numbers.

Safety and convenience are also emphasized in the design of the VT 2910C. The phone is equipped with a built-in night light, which can assist in locating it in the dark. It is also compatible with hearing aids, ensuring that individuals with hearing impairments can communicate comfortably.

In summary, the VTech VT 2910C combines modern communication technology with user-friendly features, making it a practical choice for everyone. With its robust cordless capabilities, digital answering system, and convenient features, it continues to be a reliable option for both personal and professional use. Whether for home or office, the VT 2910C is designed to enhance connectivity and ensure that users stay in touch with ease.
Top Page Image Contents