VTech VT 2910C Case of Difficulty, Phone DOESN’T Work AT ALL, No Dial Tone, Base does not Ring

Page 32

IN CASE OF DIFFICULTY

If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, In the US call:

VTech Communications at 1-800-595-9511

In Canada call VTECH Electronics at 1-500-267-7377

THE PHONE DOESN’T WORK AT ALL.

•Make sure the power cord is plugged in.

•Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone wall jack.

•Make sure the battery pack is prop- erly charged. If the LOW BATTERY is displayed on the Handset, the battery pack needs charging. If the IN USE LED (on the Base Unit) and the PHONE LED (on the Handset) do not light when you press PHONE, you should charge the battery pack.

•If you recently installed a new battery pack, make sure it is installed correctly.

NO DIAL TONE.

•First check all the suggestions above.

•If you still don’t hear a dial tone, disconnect the Base Unit from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local service. Call your local telephone company.

32

YOU GET NOISE, STATIC, OR A WEAK SIGNAL EVEN WHENYOU’RE NEAR THE BASE UNIT.

•Place the Handset in the Base mo- mentarily to re-set the security code. Then press PHONE to get a line.

Household appliances plugged into the same circuit as the Base Unit can sometimes cause interference. Try moving the appliance or the Base Unit to another outlet.

YOU GET NOISE, STATIC, OR A WEAK SIGNAL WHEN YOU’RE AWAY FROM THE BASE UNIT.

•You may be out of range. Either move close to the base, or relocate the Base Unit.

•The layout of your home may be limiting the range. Try moving the Base Unit to the second or third floor, or to some other location.

THE HANDSET DOES NOT RING WHEN YOU RECEIVE A CALL.

•Ensure that the ringer is turned on.

•Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone jack. Make sure the power cord is plugged in.

•You may be too far from the Base Unit.

•You may have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of the other phones.

THE BASE DOES NOT RING

•Make sure the BASE RINGER switch is not set to off.

•There may be too many extension phones on your line. Try unplugging

VT2910C EN MANU

32

12/16/99, 6:18 AM

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Introduction Special Features 900MHz Operation Fully Digital Link between HandsetParts Check List Belt ClipImportant Safety Instructions Operation If the product exhibits a distinct change in performanceRechargeable Battery Packs Spare Battery ChargerTo Charge The Battery Pack Charging the Handset batteriesReplacing The Handset Battery Pack Use only Vtech battery267-7377in Canada Wall Mounting Handset Features Line 1 KEY Line 2 KEYOFF KEY Tone KEYRedial KEY HOLD/PAUSE KEYCONFERENCE/CLEAR CONF/ Clear KEY INTERCOM/DELETE KEYVolume Control KEY Handset via Intercom key Handset has accessed LineExamples of the LCD Display 12/16/99, 617 AM Examples of the LCD Dicplay Base Unit Features Base Unit FeaturesBase LED Indicators Power LED Charge LEDSpare Charge LED Intercom LEDVolume UP & Down Keys TONE/PULSE SwitchConference Conf KEY Hold KEYSetting up your VTech VT 2910c Getting StartedPreference Connect the telephone line cordsBasic Operations Making CallsTo put a call on Hold from the Handset Press the HOLD/PAUSE key to place a call on HoldAnswering Calls from Handset Base Unit SpeakerphoneSwitching from Handset to Base or Base to Handset Switching from Handset to Base Unit SpeakerphoneSwitching from Speakerphone to Handset Call WaitingHandset Paging Base Unit Basic OperationBase Unit Paging Handset Programming the Ringer Advanced OperationsConference Calls Programming the Base Unit Ringer Memory DialingLocation RedialSpeed Dial Location Changing Stored NumbersTo delete all phone numbers stored in Memory Delete ALL? DEL to AllowCID-CALLER ID Characters, including spacesCall is displayed Examples of Caller ID DisplaysDialing from CID Memory Deleting CID Records Deleting a single CID recordDeleting Single Call Deleting ALL CID recordsCID-CALLER ID Maintenance Maintenance Taking Care of Your TelephoneHandset does not Ring When YOU Receive a Call Case of DifficultyPhone DOESN’T Work AT ALL No Dial ToneYOU Hear Other Calls While Using Your Phone Make sure the power cord is pluggedOne of the other phones Common Cure for Electronic EquipmentWarranty Statement What does OUR Warranty not COVER? FCC and IC Regulations United StatesVtech Communications Canada Vtech Electronics FCC PartFCC and IC Regulations IC Industry Canada This telephone is registered for use in CanadaSpecifications Table of Contents Advanced Operations Issue

VT 2910C specifications

The VTech VT 2910C is a versatile and innovative device designed to cater to the communication needs of modern users while ensuring reliability and enhanced functionality. Recognized for its user-friendly features, the VT 2910C stands out in the market, making it a popular choice amongst families and professionals alike.

One of the primary features of the VT 2910C is its advanced cordless technology. This device utilizes DECT 6.0 technology, which ensures a secure and interference-free connection. Users benefit from improved sound quality, extended range, and reduced power consumption, making conversations clearer and more reliable.

The phone is designed with a sleek, ergonomic structure that enhances usability. A large, backlit keypad and display make it easy to navigate through settings and contacts, even in low-light conditions. Furthermore, the VT 2910C includes a digital answering system that can store up to 14 minutes of messages, ensuring that users never miss important calls.

Another significant characteristic of the VT 2910C is its impressive multi-line capability. This feature allows users to manage multiple lines simultaneously, making it ideal for small businesses or home offices where efficiency is paramount. Additionally, the phone boasts a conference call feature, enabling users to connect with multiple parties effortlessly.

The device also supports caller ID functionality, displaying the name and number of incoming callers, which provides users with the option to screen their calls effectively. With memory storage for up to 50 contacts, the VT 2910C facilitates quick access to important numbers.

Safety and convenience are also emphasized in the design of the VT 2910C. The phone is equipped with a built-in night light, which can assist in locating it in the dark. It is also compatible with hearing aids, ensuring that individuals with hearing impairments can communicate comfortably.

In summary, the VTech VT 2910C combines modern communication technology with user-friendly features, making it a practical choice for everyone. With its robust cordless capabilities, digital answering system, and convenient features, it continues to be a reliable option for both personal and professional use. Whether for home or office, the VT 2910C is designed to enhance connectivity and ensure that users stay in touch with ease.
Top Page Image Contents