and set up your phone using the Configure Phone Wizard in the Response Point Administrator’s Guide.
The LCD Display
The LCD display acts as a legend for the various modes, codes and functions of the device. Each function is cov- ered in this manual or the Administrator’s Guide.
Using the phone
Make a Call
1.Press the 
key to activate the phone. You will hear a chime or spoken prompt.
2.Speaking clearly, say the name of the person in your Contact List you wish to call.
OR
1.Press the 
key to activate the phone. You will hear a dial tone.
2.Dial the number as you would on a standard phone. The number appears on the LCD screen.
You can also 
key to connect the call. To add a pause to the number you are
Answer a Call
•When there is an incoming call, the following will occur:
1.The phone will ring (unless the ringer is turned off).
2.The phone’s 3 LEDs will flash.
3.The phone icon on the LCD screen will flash.
•To answer press the 
key.
End a Call
Press the 
key.
Turn the Ringer On/Off
Press and hold the “*” key until the Ringer Off icon appears on the LCD display.
Adjust Ringer Volume
1.While the phone is ringing, press 
or 
.
2.While the phone is inactive, press 
or 
. The ringer melody will play once at the new level.
2 Technical Services: