ClearOne comm MAXAttach IP MAX IP Response Point, Unpack and Setup, Keypad Functions, Features

MAX™ IP Response Point™

Users Manual

Unpack and Setup

Unpacking information and setup instructions for your MAX IP Response Point product are found in the Quick Start Guide and Administrator’s Guide.

Keypad Functions

Button	Name	Function
		• Press to answer an incoming call.
		• Press to activate the phone and receive a dial-tone.
	Hook	• Press again to disconnect an active call.
		• While on a second line, press this button to disconnect the call (for
		example: when listening to voicemail or a getting a busy signal during
		a 3-way call).
	Response Point	Press to access the Response Point directory Automated Receptionist.
	Redial	• Press once to dial the last number called.
		• Press and hold for two seconds to enter Program mode.
		• Press once during a call to place the first line on hold and receive a
	Conference	dial tone for a second line.
		• Press again after the second call answers to connect a 3-way call.
		• Places the active call on hold. If you are not on a 3-way call, press to
	Hold	toggle between lines.
		• If pressed during a 3-way call, both lines are placed on hold. A
		second press releases all the active line(s).
		• Press once to delete the last digit entered.
	Delete	• Press and hold to clear all digits.
		• Press to exit Program mode.
	Volume up	• Adjusts volume while on a call.
	Volume down	• When not on a call, pressing these buttons will adjust ringer volume.

Mute

•Press once to mute the microphones during a call. Press again to unmute.

•If the phone is ringing, press once to mute the ringer for the inbound call.

Features

The MAX IP™ Response Point™ is an audio conferencing solution for your Response Point system. Unpack, plug-in

1 Technical Services: 800-283-5936