Avaya manual Configure the Juniper VF 3000 SBC

Page 35

6.1.4. Configure the Juniper VF 3000 SBC

The following section describes how to configure the Juniper VF 3000 SBC for LSP enterprise sites. Only the Signaling Card (SC) needs to be updated, not the Media Card (MC). In a High Reliability (HA) configuration, both the master and backup (SC) needs to be updated. This document assumes that Juniper VF 3000 SBC basic provisioning has been performed. Refer to [2] for more information. The steps below are for enterprise site A1.

Connect to the (SC) interface of the Juniper VF 3000 SBC via the console port or telnet to the management interface, which should already be administered.

Step 1. Enter “privileged” mode to input configuration and management commands. Enter the “privilege” mode password. Enter command blade session-routingÆ then sr-policy(policy to be modified) then option Æ and then lsp-address<IP address> to add the Native LSP IP address to the sr-policy defined for enterprise site A1 as shown in Figure 26.

Figure 26

TC; Reviewed:	Avaya – Proprietary	35 of 61
PV 04/24/2006	Use as authorized only pursuant to your signed agreement or	HT3-LSP-VF.doc
	Avaya policy. No other disclosure is permitted or authorized.

Image 35

Contents Abstract Avaya Solution & Interoperability Test LabTable of Contents Background On Demand SolutionsIntroduction Private-Public-Private Architecture Private-Private Architecture Including LSPs in the Solution Supporting LSPs in the Private-Public-Private Architecture Supporting LSPs in the Private-Private Architecture Configuration OverviewPrivate-Private Architecture Private-Public-Private ArchitecturePrivate-Public-Public architecture Equipment Version Equipment and Software ValidatedAvaya Hipt R3.0 Environment Avaya Hosted IP Telephony Release 3.0 LSP SolutionCustomer Enterprise Sites Service Provider Data CenterMpls Core PC-LAN based Private-Private Avaya Communication Manager PC-LAN Configuration Private-Private Avaya Hosted IP Telephony Release 3.0 LSP ConfigurationConfigure Avaya Communication Manager for LSP Support TC Reviewed Avaya Proprietary PV 04/24/2006 Configure Avaya Local Survivable Processors LSP TC Reviewed Avaya Proprietary PV 04/24/2006 Configuring the Juniper NetScreen-25 Firewall TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 Configure the Juniper VF 3000 SBC TC Reviewed Avaya Proprietary PV 04/24/2006 G650/C-LAN Configuration Private-Public-Private Configure Avaya Communication Manager for LSP Support TC Reviewed Avaya Proprietary PV 04/24/2006 Configure Avaya Local Survivable Processors LSP TC Reviewed Avaya Proprietary PV 04/24/2006 Configuring the Juniper NetScreen-25 Firewall TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 TC Reviewed Avaya Proprietary PV 04/24/2006 Configure the Juniper VF 3000 SBC TC Reviewed Avaya Proprietary PV 04/24/2006 Enterprise Customer Checkpoint Firewall Configuration General Properties of B1 LSP Static NAT NAT Properties of B1 LSP Static NAT Group Properties VerificationGlossary ReferencesAvaya Inc. All Rights Reserved