[SPEED DIAL/PROGRAM]
This button is used for speed dialing and for programming various features.
[REDIAL/PAUSE]
This buttons lets you automatically redial the last outside number you dialed, after first accessing an outside line.
Pressing this button while dialing on an external line inserts a pause in a dialing sequence.
[LO HI]
This button adjusts the volume of the speaker, handset, headset, ringer and background music when any of these is active.
[FLASH]
Depending on system programming, this button is used to disconnect or to send Flash Signal to the connected remote exchange.
Programmable buttons
The following buttons on your set have already been pro- grammed to perform specific functions. The System Administrator can program these buttons to perform other functions. If the function of certain buttons does not match those appearing in Figure 1 at the beginning of this guide, consult your System Administrator.
NOTE
With the default configuration, the following fea- tures are programmed on the four buttons above the dialpad: [MSG], [DND], [MUTE] and [SPKR].
Avanti 3015 and Avanti 3000 sets | 3 |