Avanti 3000 SET, 3015 manual Forwarding Calls, To program call forwarding

Page 31

FORWARDING CALLS

You may program your telephone set to forward your calls to another extension.

To program call forwarding

1.If your set does not have DN buttons, skip to step 2.

If you want to program forwarding for a specific DN, first press the desired DN button.

If you want the calls on all the DNs at your set for- warded to the same destination, you may do this in one step (provided you have authorization to do so and none of the DNs are restricted for Call forwarding). Pro- ceed as described below, but press [*] after entering the destination (step 5).

If more than one set with a button for the same DN is authorized to forward calls for that DN, the last pro- gramming performed overrides the previous.

2.Press [FEATURE].

3.Dial the code that designates in which situation you want your calls forwarded:

In order to program	Dial
Call forward always	[F][L] or [3][5]
Call forward busy	[F][B] or [3][2]
Call forward no answer	[F][N] or [3][6]

4. Dial the code designating the calls you want forwarded:

In order to program	Dial
All calls	[A] or [2]
External calls	[E] or [3]
Internal calls	[I] or [4]

24	Avanti 3015 and Avanti 3000 sets

Image 31

Contents Avanti 3015 set Avanti 3000 set User guide 79-650-0010/A, Issue Avanti 3015 set Avanti 3000 set User guide Telrad Telecommunications Inc Woodbury, New York Contents Avanti 3015 set faceplate Avanti 3000 set faceplate Telephone SET Buttons About Your Avanti TelephoneTRANSFER/CONFERENCE FeatureHold Pick UPFlash Speed DIAL/PROGRAMREDIAL/PAUSE LO HISpkr MSGDND MuteFloating buttons Outside line buttonsTo change the ring for your telephone set Distinctive RingingMute To enable or disable the microphone MuteTo enable or disable Handset microphone Handset Mute Press FeatureHOT Dialpad To place a ringing call To cancel Call backInternal Calls To place a non-ringing callMeet ME Barge Into a ConversationCalls To speak directly with a page initiatorTo answer a second call Answering CallsTo answer a ringing or flashing call Call WaitingPress Pick UP To return to the first callTo place an outside call Outside CallsTo redial the last outside number you dialed Waiting for AN Available Outside Line Trunk Queue To dial the number savedAutomatic Redial To temporarily deactivate Or reactivate Automatic RedialTo cancel trunk queue Press Flash To pick up a call from hold HoldTo place a call on exclusive hold To place a call on inclusive holdPress Transfer Transferring CallsTo retrieve a transferred call Press Conference again Conference CallsTo establish a conference Press ConferenceTo pick up a call ringing in your pickup group Pickup Deleting ALL Messages Messages Sending Messages Receiving MessagesTo cancel DND mode To place your telephone in do not disturb modeDo not Disturb DND To cancel your DND message To program a DND message Press Feature Press ProgramDND Messages To program call forwarding Forwarding CallsTo cancel call forwarding To cancel Call Forward to me Canceling Call Forward to MESpeed Dial Abbreviated DialingTo speed dial an outside number Memory Buttons To program a Memory button Press Feature Press ProgramTo dial with a Memory button To stop the alarm ring AlarmTo program an alarm time Press Feature To cancel the alarm settingTo lock your telephone Telephone LockTo unlock your telephone Door Unit When the door bell rings If your telephone is ringingYou can save a number of up to 16 digits during a call Disa Advanced FeaturesTo access Barge Feature CodesFeature name Abbreviation Access method Feature codesMeet ME DND messages Message number Default message Updated messageSystem messages Your speed dial codes

Related manuals

Manual 46 pages 20.35 Kb