Cisco Systems 78-10450-02 manual Field Description Usage Notes, 46-20

Chapter 46 Configuring Cisco IP Phones in Cisco CallManager

Configuring Directory Numbers

Table 46-2 Directory Line Configuration Settings

Field	Description	Usage Notes
Directory Number
Directory Number	Indicates a dialable phone number.	• Values can include a maximum
	If the words Shared Line appear in	of 50 numeric characters except
		for (.) and (@).
	red next to the directory number, the
	directory number appears on more	• Can appear in more than one
	than one device in the same	partition.
	partition. Refer to the “Shared Line	• Unique in combination with
	Appearances” section on
		partition.
	page 46-25for more information.
Partition	Indicates the route partition to	• Unique in combination with the
	which the directory number	Directory Number.
	belongs.
Directory Number Settings
Calling Search Space	Collection of partitions that are	• Changes cause update of the
	searched for numbers called from	numbers listed in the Call
	this directory number.	Pickup Group field.
		• Applies to all devices using this
		directory number.
Call Waiting	Specifies whether this directory	Applies to all devices using this
	number uses call waiting when a	directory number.
	line is busy (On), responds with a
	busy signal (Off), or uses the
	system-wide default setting
	(Default).
Call Forward and Pickup Settings
Call Pickup Group	Indicates a number that can be
	dialed to answer calls to this
	directory number (in the specified
	partition).

	Cisco CallManager Administration Guide
46-20	78-10450-02