Chapter 46 Configuring Cisco IP Phones in Cisco CallManager
Configuring Cisco IP Phones
To display the MAC address when the phone is powered on:
•Cisco IP Phone 7960 and 7940 models — press Settings, use the arrow buttons to highlight the Network Configuration menu option, and press the Select softkey.
•Cisco IP Phone 7910 — Press Settings, use the arrow buttons to locate Network Config options, press 6 on the phone keypad to begin displaying the Network Config options, then use the arrow keys to scroll the Network Config option display to the MAC address.
•Cisco IP Phone 12 SP+ and 30VIP models — press ** to display the MAC address on the second line of the LCD display.
For more information about displaying additional configuration settings on Cisco IP Phones, refer to the Cisco IP Phone 7900 Family Administration Guide and the individual Getting Started publications provided with Cisco IP Phones.
Adding a Phone
Before a Cisco IP Phone can be used, you must add the phone to
Cisco CallManager.
Procedure
Step 1 Open Cisco CallManager Administration.
Step 2 Select Device > Add a Device.
The Add a New Device page displays.
Step 3 Select Phone from the Device Type
The Add a New Phone page displays.
Step 4 Select the appropriate phone type (Cisco IP Phone model, H.323 client, or CTI port) from the phone type
•Once you select a phone type, you cannot modify it.
•CTI ports are virtual devices used by Cisco CallManager applications such as Cisco SoftPhone and Cisco AutoAttendant
|
| Cisco CallManager Administration Guide |
|
|
|
|
| ||
|
|
|
| |
|
|
|