OPERATION
TIMER ON-OFF
(1)After unit start, select your desired operation mode
Operation mode will be displayed on LCD. Power indicator lights up.
| MODE | NAF | SWING |
|
|
| TEMP |
|
|
|
|
| 3 |
|
| CKLO |
| TES |
|
TES | 2 |
| PELS | 6 |
| REMIT |
| ||
|
|
|
| |
N O F F O | 4 | RSETFILTER | 5 |
|
MA |
|
| ||
|
|
| TESER |
|
MP
ON/OFF
1
(4) Time confirming for TIMER ON
After time setting, press TIMER button to confirm. "ON" stops blinking, While "OFF" starts blinking.
Time displayed: Unit starts at Xhour X min.
(2)Press TIMER button to change TIMER mode
Every time the button is pressed, display changes as follows:
ON | OFF | ON | blank | |
OFF | ||||
|
|
|
Select OFFON .
(3)Time setting for TIMER ON
Press TIME button.
Every time the button is pressed, time increases 10min. If button is kept depressed, time will change quickly.
Every time the button is pressed, time decreases 10min. If button is kept depressed, time will change quickly. Time will be shown on LCD.
It can be adjusted within 24hours.
AM refers to morning and PM to afternoon.
(5)Time setting for TIMER OFF
Follow the same procedures in "Time setting for TIMER ON".
(6)Time confirming for TIMER OFF
After time setting, press SET button to confirm "OFF" stops flashing.
Time displayed: Unit stops at X hour X min.
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
According to the Time setting sequence of TIMER ON or TIMER OFF, either
12
