OPERATION
AUTO RUN, COOL,HEAT and DRY operation
Recommendations | Use COOL in summer. |
| Use HEAT in winter. |
| Use DRY in spring,autumn and in damp climate. |
| MODE | FAN | SWING |
AUTO | 2 | TEMP | 4 |
| |||
|
|
| |
| CLOCK | 3 | SET |
SET | TIMER |
| SLEEP |
| AM | FILTER RESET | RESET |
|
|
|
5
ON/OFF
1
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display (Not Timer setting). Power indicator lights up.
(4) Fan speed selection
Press FAN button. For each press, fan speed changes as follows:
AUTO
(2) Select operation mode
Press MODE button. For each press, operation mode changes as follows:
AUTO COOL DRY HEAT FAN
Unit will run in operation mode displayed on LCD. Stop display at your desired mode.
(3) Select temp. setting
Press TEMP button
Every time the button is pressed, temp. setting increases 1C.
If button is kept depressed, temp.setting will increase quickly.
Every time the button is pressed, temp. setting decreases 1C.
If button is kept depressed, temp. setting will decrease quickly.
Unit will start running to reach the temp. setting on LCD.
LOW MID HIGH AUTO
Unit runs at the speed displayed on LCD.
In HEAT mode, warm air will blow out after a short period of time due to
(5) Unit stop
Press ON/OFF button.
Only time and room temp remains on LCD. All indicators go out.
Vertical flap closes automatically.
Hints
Wire controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status.
10