Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Modifying VLAN Settings
Using the Phone Network Configuration Screen
Procedure
Step 1 Display the Network Configuration menu.
For instructions, see the “Displaying the Network Configuration Menu” section on page
Step 2 Unlock Network Configuration menu options.
For instructions, see the “Unlocking and Locking Options on the Network
Configuration Menu” section on page
Step 3 Scroll to Admin. VLAN Id.
Step 4 Press the Edit softkey.
Step 5 Enter the new Admin VLAN setting.
For information about entering values, see the “Guidelines for Editing Settings in the Network Configuration Menu” section on page
Step 6 Press Validat.
Step 7 Press Save.
Disabling VLAN
You can disable or enable VLAN manually. To change the VLAN setting for the Cisco Unified IP Phone, follow these steps:
Using the Phone Configuration Web Page
Procedure
Step 1 Display the Phone Configuration web page.
For instructions, see the “Accessing Network Settings through a Phone
Configuration Web Page” section on page
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
| ||
|