Cisco Systems 4.2 manual Scroll to Vlan Enabled, Press the No softkey to disable Vlan

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone

Modifying VLAN Settings

Step 2 In the pane on the left under Change Configuration, click Network Parameters. You may be prompted to enter a password.

The Network Parameters web page appears.

Step 3 To enable VLAN, in the OpFlags field, change bit 5 to 0 (zero).

To disable VLAN, in the OpFlags field, change bit 5 to 1.

For more information about this field, see OpFlags parameter in Table A-5 on page A-16.

Step 4 Click Apply.

Using the Phone Network Configuration Screen

Procedure

Step 1 Display the Network Configuration menu.

For instructions, see the “Displaying the Network Configuration Menu” section on page 4-4.

Step 2 Unlock Network Configuration menu options.

For instructions, see the “Unlocking and Locking Options on the Network

Configuration Menu” section on page 4-5.

Step 3 Scroll to VLAN Enabled.

If VLAN is enabled, the option appears as

VLAN Enabled YES

Step 4 Press the No softkey to disable VLAN.

Step 5 Press Save.

	Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-28	OL-8617-01