Cisco Systems VG204XM Verifying and Saving Your Configuration, System displays the configuration

Page 45

Chapter 4 Powering On the Voice Gateway and Performing the Initial Configuration

Performing the Initial Configuration

The system displays a summary of the available interfaces.

Step 9 Choose one of the available interfaces for connecting the voice gateway to the management network:

Enter interface name used to connect to the

management network from the above interface summary: fastethernet4

Step 10 Respond to the following prompts as appropriate for your network:

Configuring interface FastEthernet0/0:

Use the 100 Base-TX (RJ-45) connector? [yes]: yes

Operate in full-duplex mode? [no]: yes

Configure IP on this interface? [yes]: yes

IP address for this interface: 172.1.2.3

Subnet mask for this interface [255.255.0.0] : 255.255.0.0

Class B network is 172.1.0.0, 26 subnet bits; mask is /16

The system displays the configuration:

The following configuration command script was created:

hostname VG

enable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1 enable password xxxxxx

line vty 0 4 password xxxxxx

snmp-server community public

!

no ip routing

!

interface FastEthernet0/0 no shutdown

speed 100 duplex auto

ip address 172.1.2.3 255.255.0.0

!

Step 11 Respond to the following prompts. Enter 2 to save the initial configuration.

[0]Go to the IOS command prompt without saving this config.

[1]Return back to the setup without saving this config.

[2]Save this configuration to nvram and exit.

Enter your selection [2]: 2

Building configuration...

Use the enabled mode 'configure' command to modify this configuration.

Press RETURN to get started! RETURN

The user prompt is displayed.

VG>

Verifying and Saving Your Configuration

To verify the configuration and save it in NVRAM so that the configuration remains in effect after you restart the voice gateway, enter the following commands:

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide

 

OL-15959-01

4-5

 

 

 

Image 45
Contents Text Part Number OL-15959-01 Americas HeadquartersCopyright 2008-2013 Cisco Systems, Inc. All rights reserved Iii N T E N T SSite Log Audience Documentation ConventionsConvention Description Related Documentation AccessibilityVii Safety WarningsViii OBS! Spara Dessa Anvisningar Guarde Estas Instruções GEM Disse Anvisninger Xii Xiii Xiv Overview Cisco VG204, and Cisco VG204XM Voice GatewaysFront Panel Description Physical DescriptionCisco VG204 Chassis Front Panel Back Panel DescriptionCisco VG204 Chassis Back Panel LEDsLED/Color Description Product Serial Number LocationPort Numbering Conventions Interfaces and Service CapabilitiesSoftware Elements Configuration ConnectionsOperating System Voice Gateway RJ-11 RJ-45Characteristic Value Hardware and Electrical SpecificationsMemory Chassis GroundingVoice Gateway Deployment OL-15959-01 Access to the Chassis Location and Mounting RequirementsAbout Mounting Location Requirements Power Source Temperature Control and VentilationDistance Limitations for Interface Cables Fast Ethernet Maximum Distance FXS Analog Voice Port Maximum DistanceInterference Considerations OL-15959-01 Maintaining Safety with Electricity Safety RecommendationsGeneral Safety Practices Safety TipsPreventing Electrostatic Discharge Damage Installation Checklist Site LogTask Verified by Date Mounting Tools and Equipment Unpacking and InspectionTask Verified by Before You Begin Mounting the Chassis onto a WallProcedure Installing the Ground Connection Setting the Chassis on a DesktopCrimping a Ground Lug onto the Ground Wire Chassis Ground Connection Using Ring Terminal Connecting CablesConnecting a Terminal or PC to the Console Port Connecting Input Power to the ChassisConnecting a Terminal or PC to the Console Port Connecting an FXS LineConnecting an FXS Line Powering On the Voice Gateway Using the Cisco IOS CLI to Configure the Voice Gateway Performing the Initial ConfigurationUsername username privilege 15 secret 0 password Using the setup Command to Configure the Voice GatewayEnter a hostname for the voice gateway System displays the configuration Verifying and Saving Your ConfigurationTroubleshooting Command PurposeSymptom Possible Cause Corrective Action IN-1 D EIN-2
Related manuals
Manual 52 pages 56.9 Kb

VG202, VG204XM, VG204, VG202XM specifications

Cisco Systems has long been a leader in the realm of networking technology, providing innovative solutions for businesses of all sizes. Among its products, the Cisco VG202XM, VG204, VG204XM, and VG202 series stand out as vital components in voice gateway solutions for IP telephony applications.

The Cisco VG202XM and VG204 series are designed to facilitate the convergence of voice and data as businesses transition to VoIP (Voice over Internet Protocol). These voice gateways offer seamless integration with legacy telephony systems while enabling the deployment of advanced IP-based telephony features. They are particularly useful for organizations looking to preserve their existing investments in traditional telephony infrastructure while embracing modern communication technologies.

One of the main features of the VG202XM and VG204 series is their support for two-line interfaces, catering to varying deployment needs. The VG202 provides two FXS (Foreign Exchange Station) ports, which allow businesses to connect analog phones and fax machines directly. The VG204 enhances this capability by offering four FXS ports, accommodating larger user bases and providing more connections for local telephony equipment.

These gateways support an array of voice codecs and can handle up to 16 concurrent calls, ensuring high-quality voice communication in busy environments. Their integration with Cisco's Unified Communications Manager allows users to access a host of advanced telephony features such as call forwarding, voicemail, and conferencing.

On the technology front, the VG202XM and VG204 series support both SIP (Session Initiation Protocol) and H.323 protocols, making them versatile for varied network environments. They also offer advanced QoS (Quality of Service) capabilities, ensuring that voice traffic is prioritized over other types of data, which is essential in maintaining call clarity and reliability.

Additionally, the VG204XM variant adds built-in safety features, such as power over Ethernet (PoE), which eliminates the need for separate power supplies for connected devices. This not only streamlines deployment but also enhances the reliability of the voice system.

In terms of management, these devices are equipped with Cisco's user-friendly interface, which simplifies configuration and monitoring. They can be managed through various tools offered by Cisco, making it easier for IT departments to maintain and optimize their voice services.

Overall, the Cisco VG202XM, VG204, VG204XM, and VG202 series deliver robust, scalable, and reliable solutions for businesses aiming to leverage the benefits of voice gateways in their enterprise networks. These devices not only provide essential voice capabilities but also pave the way for future growth and integration in an increasingly digital world.