Cisco Systems VG202XM, VG204XM manual Accessibility, Related Documentation

Page 6

Table 1

Documentation Conventions (continued)

 

 

 

Convention

 

Description

 

 

 

 

<

>

 

Nonprinting characters, for example passwords, appear in angle brackets in contexts where italic font is

 

 

 

not available.

 

 

 

 

[

]

 

Default responses to system prompts appear in square brackets.

 

 

 

 

Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this publication.

Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.

Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Tip Means the following information will help you solve a problem. The tips information might not be

troubleshooting or even an action, but could be useful information, similar to a Timesaver.

Accessibility

You can configure the Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM voice gateways by using the Cisco command-line interface (CLI). The CLI conforms to code 508 because it is text based and relies on a keyboard for navigation. You can configure and monitor all functions of the voice gateway through the CLI.

For a complete list of guidelines and Cisco products’ adherence to accessibility, see Cisco Accessibility Products at the following URL:

http://www.cisco.com/web/about/responsibility/accessibility/products

Related Documentation

The Cisco IOS software running your Cisco voice gateway includes extensive features and functionality. For information that is beyond the scope of this document, or for additional information, use the resources listed below:

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide (this document)

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Quick Start Guide

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide

 

vi

OL-15959-01

 

 

 

Image 6
Contents Americas Headquarters Text Part Number OL-15959-01Copyright 2008-2013 Cisco Systems, Inc. All rights reserved N T E N T S IiiSite Log Audience Documentation ConventionsConvention Description Accessibility Related DocumentationSafety Warnings ViiViii OBS! Spara Dessa Anvisningar Guarde Estas Instruções GEM Disse Anvisninger Xii Xiii Xiv Cisco VG204, and Cisco VG204XM Voice Gateways OverviewPhysical Description Front Panel DescriptionBack Panel Description Cisco VG204 Chassis Front PanelLEDs Cisco VG204 Chassis Back PanelProduct Serial Number Location LED/Color DescriptionInterfaces and Service Capabilities Port Numbering ConventionsOperating System Configuration ConnectionsSoftware Elements Voice Gateway RJ-11 RJ-45Memory Hardware and Electrical SpecificationsCharacteristic Value Chassis GroundingVoice Gateway Deployment OL-15959-01 Access to the Chassis Location and Mounting RequirementsAbout Mounting Location Requirements Power Source Temperature Control and VentilationDistance Limitations for Interface Cables Fast Ethernet Maximum Distance FXS Analog Voice Port Maximum DistanceInterference Considerations OL-15959-01 Safety Recommendations Maintaining Safety with ElectricityGeneral Safety Practices Safety TipsPreventing Electrostatic Discharge Damage Installation Checklist Site LogTask Verified by Date Mounting Tools and Equipment Unpacking and InspectionTask Verified by Mounting the Chassis onto a Wall Before You BeginProcedure Setting the Chassis on a Desktop Installing the Ground ConnectionCrimping a Ground Lug onto the Ground Wire Connecting Cables Chassis Ground Connection Using Ring TerminalConnecting Input Power to the Chassis Connecting a Terminal or PC to the Console PortConnecting an FXS Line Connecting a Terminal or PC to the Console PortConnecting an FXS Line Powering On the Voice Gateway Performing the Initial Configuration Using the Cisco IOS CLI to Configure the Voice GatewayUsing the setup Command to Configure the Voice Gateway Username username privilege 15 secret 0 passwordEnter a hostname for the voice gateway Verifying and Saving Your Configuration System displays the configurationTroubleshooting Command PurposeSymptom Possible Cause Corrective Action D E IN-1IN-2
Related manuals
Manual 52 pages 56.9 Kb

VG202, VG204XM, VG204, VG202XM specifications

Cisco Systems has long been a leader in the realm of networking technology, providing innovative solutions for businesses of all sizes. Among its products, the Cisco VG202XM, VG204, VG204XM, and VG202 series stand out as vital components in voice gateway solutions for IP telephony applications.

The Cisco VG202XM and VG204 series are designed to facilitate the convergence of voice and data as businesses transition to VoIP (Voice over Internet Protocol). These voice gateways offer seamless integration with legacy telephony systems while enabling the deployment of advanced IP-based telephony features. They are particularly useful for organizations looking to preserve their existing investments in traditional telephony infrastructure while embracing modern communication technologies.

One of the main features of the VG202XM and VG204 series is their support for two-line interfaces, catering to varying deployment needs. The VG202 provides two FXS (Foreign Exchange Station) ports, which allow businesses to connect analog phones and fax machines directly. The VG204 enhances this capability by offering four FXS ports, accommodating larger user bases and providing more connections for local telephony equipment.

These gateways support an array of voice codecs and can handle up to 16 concurrent calls, ensuring high-quality voice communication in busy environments. Their integration with Cisco's Unified Communications Manager allows users to access a host of advanced telephony features such as call forwarding, voicemail, and conferencing.

On the technology front, the VG202XM and VG204 series support both SIP (Session Initiation Protocol) and H.323 protocols, making them versatile for varied network environments. They also offer advanced QoS (Quality of Service) capabilities, ensuring that voice traffic is prioritized over other types of data, which is essential in maintaining call clarity and reliability.

Additionally, the VG204XM variant adds built-in safety features, such as power over Ethernet (PoE), which eliminates the need for separate power supplies for connected devices. This not only streamlines deployment but also enhances the reliability of the voice system.

In terms of management, these devices are equipped with Cisco's user-friendly interface, which simplifies configuration and monitoring. They can be managed through various tools offered by Cisco, making it easier for IT departments to maintain and optimize their voice services.

Overall, the Cisco VG202XM, VG204, VG204XM, and VG202 series deliver robust, scalable, and reliable solutions for businesses aiming to leverage the benefits of voice gateways in their enterprise networks. These devices not only provide essential voice capabilities but also pave the way for future growth and integration in an increasingly digital world.